Best Seller Items
-
-
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00 -
LED 5mm Bulb Common Anode
Specification:
- 5mm Round Standard Directivity
- Color : Red, Blue, Green, White, Yellow
- UV Resistant : Eproxy
- Forward Current (IF): 30mA
- Forward Voltage (VF): 1.8V to 2.4V
Rs 4.00LED 5mm Bulb Common Anode
Rs 4.00 -
Jumper Wire Male-Male 30cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Male 30cm
Rs 8.00
-
-
-
Active GPS Patch Antenna (25*25)
Quick Info :
- Frequency – 1559Mhz-1609Mhz
- Active antenna noise figure < 1.5dB
- Cable – RF1.13
- Connector – I-PEX
Rs 650.00Active GPS Patch Antenna (25*25)
Rs 650.00 -
LM2596 CC/CV Li-Ion Charger/LED Power Supply Module
Quick Info :
- Input Voltage: 5-35V
- Input Voltage Must Be At Least 2V Above Output Voltage
- Output Voltage: 1.25-30V (infinitely adjustable)
- Constant Current Range: 0-3A (infinitely adjustable)
Rs 690.00 -
-
ATTINY85-20PU Atmel
Quick Info :
- : 20MHz
- : 8KB
- : 512Byte
- : 8 Pins
Rs 690.00ATTINY85-20PU Atmel
Rs 690.00 - : 20MHz
-
-
-
GPS Adhesive Type Antenna SMA
Quick Info :
- Frequency – 1559MHz-1609Mhz
-
Active antenna noise figure <1.5dB
-
Polarization -RHCP or Linear
-
Cable length – Max. 3m
Rs 690.00GPS Adhesive Type Antenna SMA
Rs 690.00 -
Project Enclosure 115mm X 90mm X 55mm
Quick Info :
- Dimensions: 115mm X 90mm X 55mm
Rs 690.00Project Enclosure 115mm X 90mm X 55mm
Rs 690.00 -
Arduino Compatible XD-204 Data Logger Shield
Quick Info :
- Real Time Clock Module : DS1307
- SD Card reader : standard SD card
- RTC battery included
Rs 690.00 -
Wire Cutter Nipper 12
Quick Info :
- Size (L x B x H) : 15 cm x 5 cm x 2 cm
- Weight : 100 g
- Size : 6 Inch
Rs 690.00Wire Cutter Nipper 12
Rs 690.00 -
-
Inductive Proximity Sensor PNP PL-05P
Quick Info :
- Sensing distance : 5mm
- Operating voltage : 10 – 30 VDC
- Response frequency : 800Hz
- Output method : PNP, 150mA load
Rs 690.00Inductive Proximity Sensor PNP PL-05P
Rs 690.00 -
SN65HVD230 CAN Module
Quick Info :
- Operates with a single 3.3 V Supply
- Bus Pin ESD Protection Exceeds ±16 kV HBM
- High Input Impedance Allows for Up to 120 Nodes on a Bus
Rs 690.00SN65HVD230 CAN Module
Rs 690.00 -
Digital Audio Power Amplifier Module HW-710
Quick info :
- Output Power: 2x50W (stereo mode) or 100W (mono mode)
- Frequency Response: 20Hz to 20kHz
- Signal-to-Noise Ratio (SNR): ≥100dB
- Chip: TPA3116D2
- Power Supply Voltage: 12-24V DC
Rs 690.00 -
5” Micro Nipper Cutting Tool
Quick Info :
- Length: 5 inches (125mm)
- Blade Material: Hardened Carbon Steel / Stainless Steel
- durable blades for clean and accurate cuts.
- Made from high-quality materials for long-lasting performance.
- Flush-cut or semi-flush (for clean, precise cuts)
Rs 690.005” Micro Nipper Cutting Tool
Rs 690.00 -
KW-401 Speaker 65W 4 inch
Quick Info :
- Model: KW-401
- Maximum Power: 130 Watts (MAX)
- Nominal Power: 65 Watts (RMS)
- Impedance: 40HM
- Frequency Response: 100 Hz – 18,000 Hz
- Material: Metal frame with paper cone
Rs 690.00KW-401 Speaker 65W 4 inch
Rs 690.00 -
LiPo Battery 3.7V 250mAh
Quick Info :
- Battery Type : Lithium Polymer (LiPo)
- Nominal Voltage : 3.7V DC
- Capacity : 250mAh
- Charging Voltage : 4.2V ± 0.05V
- Discharge Cutoff Voltage : ~3.0V
- Continuous Discharge Rate : ~1C – 2C
- Max Discharge Current : ~250mA – 500mA
Rs 690.00LiPo Battery 3.7V 250mAh
Rs 690.00 -
Bluetooth XBee Shield V3 Module Wireless Control
Quick Info :
- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- Coupled with the XBee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.
Rs 750.00 -
3 Channel Line TCRT5000 Tracking Module
Quick Info :
- This infrared sensor trio detector and trio output
- Build-in TCRT5000 sensor
- Number of channels : 3
Rs 750.003 Channel Line TCRT5000 Tracking Module
Rs 750.00 -
GY-BMI160 Module 6DOF 6 Axis Gyroscope
Quick Info :
- Power supply: 3-5v (Recommended 3.3v)
- Communication mode: Standard IIC/SPI communication protocol
- Chip built in AD 16bit converter, 16 bit data output
- Gyro range: ±125 ±250 ±500 ±1000 ±2000 degrees /s
Rs 750.00GY-BMI160 Module 6DOF 6 Axis Gyroscope
Rs 750.00 -
DS1302 Real Time Clock Module
Quick Info
- Supply voltage (typically): 3.3V
- Battery not included
- Battery : CR2032
Rs 790.00DS1302 Real Time Clock Module
Rs 790.00 -
AC-DC 9V 2A SMPS Power Adapter
Specifications :
- Input Voltage : AC 100 ~ 240V 50/60 HZ
- Output Voltage: DC 9V
- Output Current: 1A
- Plug Type : UK Plug
Rs 790.00AC-DC 9V 2A SMPS Power Adapter
Rs 790.00 -
VL53L0X Laser Ranging Sensor Module
Quick Info :
- Supply Voltage: 2.6V to 5.5V
- Average active ranging sensor current: 19mA
- Interface: I2C
- Dimension: 13mm x 11mm
Rs 790.00Rs 1,250.00VL53L0X Laser Ranging Sensor Module
Rs 790.00Rs 1,250.00 -
STM32F103C8T6 Development Board Module
Quick info :
- Model : STM32F103C8T6
- Core: ARM 32 Cortex-M3 CPU
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
Rs 790.00STM32F103C8T6 Development Board Module
Rs 790.00 -
AC-DC 12V 2A SMPS Power Adapter
Quick Info :
- Input Voltage: 200-240V
- Output Voltage: 12V DC
- Output Current: 2A
- Connector Type: 5.5mm x 2.1mm / 2.5mm DC barrel plug
Rs 790.00Rs 890.00AC-DC 12V 2A SMPS Power Adapter
Rs 790.00Rs 890.00 -
RGB Pixel LED Controller Driver WS2811 WS2812 UCS1903
Quick Info :
- Support WS2811 WS2812B LED LED lights. It can’t control SK6812 RGBW and regular RGB LED lights without a driver IC. 300+ color modes include rainbow, wave, breathing, strobing, gradual change, color cycle, comet, static, fading, and chasing. Color-changing speed and brightness are adjustable.
Rs 850.00 -
HLK-PM01 AC-DC 220V To 5V 0.6A Mini Power Supply Module
Quick Info :
- Type : HLK-PM01
- Input voltage (AC pins) : 90 – 264V AC (maximum)
- Output voltage ( + Vo and -Vo pins) : 5V DC
- Maxi. output current : 0.6A (continuous)
Rs 890.00 -
-
-
GSM GPRS Adhesive Antenna
Quick Info :
- Low Freq. range – 820-960mHz
- High Freq. range – 1710-1990mHz
- Cable length – Max 3m
- Connector Type – SMA
Rs 890.00GSM GPRS Adhesive Antenna
Rs 890.00
