Best Seller Items
-
-
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 25.00 – Rs 75.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00 -
Jumper Wire Male-Male 30cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Male 30cm
Rs 8.00
-
-
DB9 Female Screw Terminal to RS232 RS485 Conversion Board
Quick Info :
- Perfect for experimentation and prototype work
- Brings all 9 pins of a DB9 connector to screw terminal blocks
- Adapter used for communication debug
- 9 pcs signal line was all lead out, name and number clearly labeled;
Rs 290.00 -
Analog Hall Effect Sensor Module
Quick Info :
- Operating Voltage: 5V DC
- Current Draw: 8mA
- Dimensions: 18 x 15 x 5 mm (L x W x H)
Rs 290.00Analog Hall Effect Sensor Module
Rs 290.00 -
MC-38 Wired Magnetic Door Window Switch
Quick Info :
- Connection type : Normally Open
- Actuation Distance (mm) : 15 ~ 25
- Connecting cable length (cm) : 30
Rs 290.00MC-38 Wired Magnetic Door Window Switch
Rs 290.00 -
-
NE555 Pulse Generator Module
Quick Info :
- The working voltage: 5 ~ 12V
- Output amplitude: 4.2V V-PP(5v input) to 11.4V V-PP(12V input).
- Maximum output current: >=15mA (5V IN), >=35mA (12V IN)
Rs 290.00NE555 Pulse Generator Module
Rs 290.00 -
-
Keypad Flexible 4 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 4-key membrane switch pad has 5 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 285.00Keypad Flexible 4 Keys
Rs 285.00 -
MP2307DN Mini 3A DC to DC Step down (Buck) Adjustable Module V2
Quick Info :
- Input voltage : 4.75 – 23VDC
- Adjustable Output voltage : 1.0 – 17VDC
- Output Amps : 3A surge current, 1.8A continuous rated current
Rs 280.00 -
Project Enclosure 100mm X 64mm X 47mm
Quick Info :
- Dimensions: 100mm X 64mm X 47mm
Rs 260.00Project Enclosure 100mm X 64mm X 47mm
Rs 260.00 -
-
STM8 Development Board STM8S003F3P6
Quick Info
- On-board STM8S003F3P6 chip
- On-board SWIM connector for programming
- On-board reset switch
- Reserved external crystal oscillator soldering place
- AMS1117-3.3 voltage regulator for convering 5 V power supply to 3.3 V
- Mini USB connector for powering the board
- Board Size: 36.5 x 21.6 mm
Rs 250.00STM8 Development Board STM8S003F3P6
Rs 250.00 -
-
SX1308 DC-DC Step-Up Adjustable Power Module
Quick Info :
- Maximum input voltage: DC 2-24V
- Maximum output voltage: DC 2-28V
- Maximum current output: 2A
Rs 250.00 -
FPV Pan/Tilt Camera Mount
Quick Info :
- Weight: 38g
- Size: 70x38x36mm
- Compatible Servos : Servo 9g or Servo MG90S
Rs 250.00FPV Pan/Tilt Camera Mount
Rs 250.00 -
Keypad Flexible 12 Keys
Quick Info :
- 12-key membrane switch pad has 7 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 250.00Keypad Flexible 12 Keys
Rs 250.00 -
-
MAX485 RS485 to TTL module
Quick Info :
- Working voltage：5V
- Connect to 2P terminal on board, for wiring of RS-485 to communicate
Rs 220.00MAX485 RS485 to TTL module
Rs 220.00 -
Project Enclosure 100mm X 60mm X 27mm
Quick Info :
- Dimensions: 100mm X 60mm X 27mm
Rs 200.00Project Enclosure 100mm X 60mm X 27mm
Rs 200.00 -
Car Automobile Fuse Holder 2-30A
Quick info :
- The fuse holder works with any 2-30 amp blade fuse.
- The structure of the fuse holder provides extra protection against water and dust.
Rs 190.00Car Automobile Fuse Holder 2-30A
Rs 190.00 -
-
TCRT5000 Line Following/ Optical Sensor Module
Quick Info :
- Working voltage of 3.3V to 5V
- Output form: digital switch output (0 and 1)
- Using infrared reflection sensors TCRT5000
- Test reflection distance: 1mm to 25mm
Rs 190.00Rs 270.00TCRT5000 Line Following/ Optical Sensor Module
Rs 190.00Rs 270.00 -
Ultrasonic Sensor Bracket
Quick Info :
- Acrylic Body.
- Easy to install.
- Compatible with HC-SR04
Rs 190.00Ultrasonic Sensor Bracket
Rs 190.00 -
Project Enclosure 85mm X 50mm X 21mm
Quick Info :
- Dimensions: 85mm X 50mm X 21mm
Rs 180.00Project Enclosure 85mm X 50mm X 21mm
Rs 180.00 -
-
-
Piezo Electronic Alarm Buzzer
Quick Info :
- Rated Voltage : DC 3-24V;
- Sound Pressure : 95dB;
- Overall Size : 38 x 22mm
Rs 150.00Piezo Electronic Alarm Buzzer
Rs 150.00 -
-
-
-
40 Pin 2.54mm Single Row Round Male Pin Header
Specifications :
- Pitch : 2.54mm
- Connector type : Male
- Body Orientation: Straight
Rs 140.00 -
-
2 Pin Connector Pair 2.8mm Pitch
Quick Info :
- Wire Type : 18AWG
- Pitch: 2.80mm±0.05
- Length: 15cm
Rs 120.002 Pin Connector Pair 2.8mm Pitch
Rs 120.00