Quick Info :
Operating voltage range: +8 to +18V
Maximum supply voltage:+28V
Maximum repetitive current per output: 3.5A
Rs 480.00
Quick Info :
Can provide up to 20 Watts as output power
Wide range of power supply from 6V to 36V
Short-circuit protection to ground
Rs 80.00
Quick Info :
18 W mono amplifier circuit design
On-board 10K potentiometer for volume adjustment
Operating Voltage Range: 6 V to 12 V
Rs 290.00
Quick Info :
Operating Voltage: -25V to +25V
Output: 28Watts with 4Ω speaker
Voltage Gain: 80dB
Supply Voltage rejection: 45dB
Rs 90.00
Quick Info :
Output Power: 25W
Amplifier Class: AB
No. of Channels: 2
Channel Supply Voltage Range: ± 5V to ± 25V
Load Impedance: 4ohm
Rs 650.00
Quick Info :
Supply Voltage – Max: 18 V
Supply Voltage – Min: 6.5 V
Gain: 32 dB
Number of Channels: 2
Channel Operating Supply Current: 2 A
Rs 720.00
Quick Info :
Output Power: 35 W
Type: 2-Channel Stereo or 4-Channel Stereo
Audio – Load Impedance: 4 Ohms
Supply Voltage – Max: 18 V
Supply Voltage – Min: 8 V
Rs 650.00
Quick Info :
Type: Quad Bridge Class AB Audio Amplifier
Number of Channels: 4
Operating Voltage Range: 6V – 18V (Typical: 14.4V)
Maximum Power Output: 4 x 41W (at 4Ω, 14.4V, 10% THD)
Nominal Output Power: 4 x 25W (at 4Ω, 14.4V, 1% THD)
Load Impedance: 4Ω to 8Ω
Rs 650.00
Quick Info :
Vcc Range Typical 3.0 – 5.5V
Collector Light Current
20 lux 10uA (typical)
100 lux 50uA (typical)
Spectral Detection
Detection Range 440nm-800nm
Rs 590.00
Quick Info :
Voltage rating (UL/IEC): 250/250 V
Current rating (UL/IEC): 16/24 A
Contact resistance: 20 mΩ
Wire gauge: 22-14 AWG
Wire strip length: 5 mm
Rs 30.00
Quick Info :
Voltage rating (UL/IEC): 250/250 V
Current rating (UL/IEC): 16/24 A
Contact resistance: 20 mΩ
Wire gauge: 22-14 AWG
Wire strip length: 5 mm
Rs 50.00
Quick Info :
True TFT display with 262,144 vibrant colors
4-wire SPI interface – minimal pin usage
Works with 3.3V and 5V systems
Built-in microSD card slot for bitmap storage
Compatible with Arduino, Raspberry Pi, ESP32
Controllable LED backlight
Compact 34.5×58.0mm PCB size
Rs 1,490.00
Quick info:
Temperature Cutoff: 102-145
Rated Current: 2A
Rated Voltage: 250V~
Rs 30.00
Quick Info :
Transistor Polarity : NPNCollector Emitter Voltage V(br)ceo : 60VDC Collector Current : 5APower Dissipation Pd : 65W
Rs 60.00
Quick Info :
Transistor Type: NPN Darlington
Voltage Ratings:
Collector-Emitter Voltage (Vce) : 80V
Collector-Base Voltage (Vcb) : 80V
Emitter-Base Voltage (Veb) : 5V
Rs 60.00
Quick Info :
Transistor Type : NPN – Darlington
Current – Collector (Ic) (Max) : 5 A
Voltage – Collector Emitter Breakdown (Max) : 100 V
Rs 40.00
Quick Info :
Transistor Type: PNP Darlington
Voltage Ratings:
Collector-Emitter Voltage (Vce): -100V
Collector-Base Voltage (Vcb): -100V
Emitter-Base Voltage (Veb): -5V
Rs 80.00
Quick Info :
Transistor Type : NPN Darlington Power Transistor
Collector-Emitter Voltage : 100 V
Collector-Base Voltage : 100 V
Emitter-Base Voltage : 5 V
Continuous Collector Current : 10 A
Peak Collector Current : 15 A
Power Dissipation : 125 W
Rs 65.00
Quick Info :
Transistor Type: NPN
Collector-Emitter Voltage (Vce): 60V
Collector-Base Voltage (Vcb): 80V
Emitter-Base Voltage (Veb): 5V
Collector Current (Ic): 15A (maximum)
Power Dissipation (Pd): 115W
Rs 340.00
Quick Info :
Transistor Type: NPN Bipolar Junction Transistor (BJT)
Voltage Ratings:
Collector-Emitter Voltage (Vce): 60V
Collector-Base Voltage (Vcb): 60V
Emitter-Base Voltage (Veb): 5V
Rs 45.00
Quick Info :
Transistor Type: PNP Bipolar Junction Transistor (BJT)
Voltage Ratings:
Collector-Emitter Voltage (Vce): -100V
Collector-Base Voltage (Vcb): -100V
Emitter-Base Voltage (Veb): -5V
Rs 45.00
Quick Info :
IC Type : JFET-Input Operational Amplifier
Supply Voltage : ±3 V to ±18 V
Input Bias Current : 20 pA (typical)
Input Offset Voltage : 3 mV (max)
Slew Rate : 13 V/µs
Gain Band width Product :3 MHz
Rs 40.00
Quick Info :
Supply Voltage : ±3V to ±18V
Input Bias Current : 5pA
Input Offset Voltage : 3mV
Slew Rate : 13V/µs
Gain Bandwidth Product : 3MHz
Common-Mode Rejection Ratio (CMRR) : 100dB
Rs 40.00
Quick Info :
Number of Amplifiers : 4
Supply Voltage : ±3V to ±18V
Input Offset Voltage : 3mV
Input Bias Current : 30pA
Gain Bandwidth Product : 3MHz
Rs 50.00
Quick Info :
C Type : Programmable Shunt Regulator
Reference Voltage : 2.495V
Adjustable Output Voltage : 2.5V to 36V
Maximum Cathode Current : 100mA
Reference Voltage Tolerance : ±0.5%
Rs 30.00
Quick Info :
Output Voltage : 40V
Output Current : 200mA
Supply Voltage Min : 7V
Supply Voltage Max : 40V
Controller IC Case Style : DIP
Rs 60.00
Quick Info :
Input voltage: 4.35-6V (recommended voltage 5V) Charging current: 1 Amps
Led indicator: Red is charging, Blue is full charged
The board size: about 2.5 * 1.65 CM
Rs 150.00Rs 200.00
Quick Info :
Input Interface: Micro USB port
Charging method: linear charge.
A full charge voltage: 4.2V.
Rs 60.00Rs 190.00
Quick info:
Charges both Li-ion (4.2V) and LiFePO4 (3.6V) batteries
Adjustable charging current: 0.5A to 2A (default 1A)
Embedded switching regulator for efficient charging
LED indicators: Red (charging), Green (complete)
Multiple protection circuits: overcurrent, over-discharge, overvoltage
Compact design with heat dissipation pad
Easy voltage switching via F solder pad connection
Rs 390.00
Quick Info :
Model: TP5100
Input Supply voltage (V): 5 ~ 18
Programmable charge current: 0.1 ~ 2 A.
Rs 250.00
