Best Seller Items
-
-
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 25.00 – Rs 75.00 -
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Male 30cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Male 30cm
Rs 8.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00
-
Voltage Sensor Module 25V
Quick Info :
- Voltage sensing range – 5v to 25v
- Voltage Analog Resolution: 0.00489V
Rs 150.00Voltage Sensor Module 25V
Rs 150.00 -
Voltmeter 0-200VDC
Quick info :
Detection Voltage Range DC: 3.5-130V（max）
Rs 450.00Rs 500.00Voltmeter 0-200VDC
Rs 450.00Rs 500.00 -
-
W1209 Digital Temperature Controller Module
Quick Info :
- Temperature range: -50 -110°C
- Dimensions: 48.5 * 40mm
- Temperature control mode: ON / OFF
- Control accuracy: 0.1 °C
- Output voltage: DC 12V
Rs 750.00 -
W3001 220V Temperature Controller
Quick Info :
- Temperature measurement and programming range: -50°C …110°C
- Measurement accuracy: 0.1°C in the range from -9.9°C to 99.9°C; or 1.0°C outside this range
- Control accuracy: 0.1°C 0.1°C in the range -9.9°C to 99.9°C; or 1.0°C outside this range
- Hysteresis accuracy: 0.1°C
- Reading update time: 0.5 seconds
- Supply voltage, V: 110-220 AC
Rs 890.00W3001 220V Temperature Controller
Rs 890.00 -
W5100 Arduino Compatible Ethernet Shield
Quick Info :
- Operating voltage:5V (supplied from the Arduino Board)
- Ethernet Controller: W5500 with internal 32K buffer
- Connection speed: 10/100Mb
- Connection with Arduino on SPI port
Rs 4,390.00W5100 Arduino Compatible Ethernet Shield
Rs 4,390.00 -
Water Level Sensor Module
Quick Info :
- Working Voltage : DC 3-5V
- Working Current : <20mA
- Operating temperature: 10~30 Celsius
- Sensor Type : Analog
Rs 130.00Water Level Sensor Module
Rs 130.00 -
Waterflow Sensor 0.5 inch
Quick Info :
- Working Voltage : DC 5V~24V
- Flow Rate Range : 1~30L/min
- Load Capacity: ≤10mA (DC 5V)\
- Water Inlet/ Outlet Diameter : 0.5 inch
Rs 1,590.00Waterflow Sensor 0.5 inch
Rs 1,590.00 -
Wire Cutter Nipper 07
Quick Info :
- Material : Steel
- Colour : Blue
- Maximum Cutting Capacity : 0.8mm to 1.2mm
Rs 490.00Wire Cutter Nipper 07
Rs 490.00 -
Wire Stripper/Cutter Automatic Tool
Quick Info :
- 2 in 1 wire stripper & cutter
- Applicable wire stripper size: 0.2 – 6mm
Rs 1,790.00Wire Stripper/Cutter Automatic Tool
Rs 1,790.00 -
WS2811 12mm Pixel LED RGB Addressable
Quick Info :
- Individually control: 1 PCS LED pixel & 1 IC.
- IC chip: WS2811 IC.
- 50pcs/string.
Rs 2,190.00WS2811 12mm Pixel LED RGB Addressable
Rs 2,190.00 -
X360TR Analog Multimeter / Multi Tester
Quick Info :
- Analog Multimeter
- AC/DC
- Transistor
- Resistance
Rs 1,790.00Rs 1,990.00X360TR Analog Multimeter / Multi Tester
Rs 1,790.00Rs 1,990.00 -
XL4015 DC to DC Step down (Buck) Adjustable Module
Quick Info :
- Wide input voltage 8V ~ 35V
- Wide Output voltage 2V ~ 32V
- Max Output current 5A
- Alternative : LM2596 Buck
Rs 400.00Rs 550.00XL4015 DC to DC Step down (Buck) Adjustable Module
Rs 400.00Rs 550.00 -
XL6009 DC to DC Step up (Boost) Adjustable Module
Quick Info :
- Input voltage: 3 – 32V
- Output voltage: 5 – 35V (adjustable)
- Output current: Maximum output current 4A
- Adjustable potentiometer onboard for output voltage adjustment.
Rs 450.00Rs 550.00XL6009 DC to DC Step up (Boost) Adjustable Module
Rs 450.00Rs 550.00 -
XLR Jack Pair 16mm 2 – 5 Pin
Quick Info :
- Pin : 2, 3 or 5
- XLR chassis mount
- XLR cable connector
- Diameter for mounting: 16mm
Rs 235.00 – Rs 320.00 -
Quadcopter Drone ESP32 WiFi V1 Alphatronic
Quick info :
- WiFi controlled: Operated through a smartphone.
- MPU6050 IMU for stability control.
- All-in-one PCB: No need for additional 3D printed parts.
- Easily upgradable: Can incorporate extra features like position hold or height hold using external modules.
- Compact and lightweight.
- Built-in battery charger.
- Built-in USB interface for programming and debugging.
Rs 14,500.00Quadcopter Drone ESP32 WiFi V1 Alphatronic
Rs 14,500.00 -
Realtek AMB82-Mini IoT AI Camera
Quick Info :
- Realtek AMB82-Mini IoT AI Camera, Arduino Dev, 1080p Sensor, Multiple IO
- Wi-Fi, Bluetooth, 1080p Sensor, H264/H265 Video, Multiple IO, Tensorflow-Lite AI
- Equipped with Ultra-Low-Power AI Wi-Fi IP Camera SoC for rapid boot-up and low power consumption
Rs 19,500.00Realtek AMB82-Mini IoT AI Camera
Rs 19,500.00 -
0.47uF Ceramic Capacitor 2A474J 2A473J
Quick Info :
- Capacitance:0.47uf （474）
- Rated Voltage:100V(2A)
Rs 5.00 -
1 channel 5V DC OMRON Solid State Relay Module
Quick Info :
- Channels : 1
- Input release voltage: 3.5 to 5V
- Rated load voltage: 100V to 240V AC
- Load current: 0.10 to 2A
Rs 600.00 -
1 channel 5V DC Relay Module
Quick Info :
- Channel : 1
- Coil sensitivity = 5VDC
- Maximum Contact capacity = 250VAC/10VDC
- Maximum Current capacity = 10A
Rs 250.00Rs 390.001 channel 5V DC Relay Module
Rs 250.00Rs 390.00 -
1.28-Inch Round LCD TFT Display GC9A01
Specification:
- Size: 1.28inch
- Resolution: 240 × 240
- Driving chip: GC9A01
- Interface method: SPI
- Color: Full-color RGB
Rs 2,190.001.28-Inch Round LCD TFT Display GC9A01
Rs 2,190.00 -
125 kHz NFC USB RFID Card Reader
Quick info:
- Plug-and-Play: Easy setup with USB 2.0 interface
- Compatibility: ISO 14443 Type A/B, ISO 15693, and NFC cards
- Data Transfer speed: 106 kbps, 212 kbps, and 424 kbps
- Power Supply: 5V DC
Rs 2,100.00125 kHz NFC USB RFID Card Reader
Rs 2,100.00 -
125KHz EM4100 RFID Card Reader Module
Quick Info :
- Support Card Type: Read-only ID card (EM4100, IM4001)
- Support frequency: 125KHz
- Reader Time: <0.2s
- Read Range: 3-10cm
Rs 990.00125KHz EM4100 RFID Card Reader Module
Rs 990.00 -
12V 20A SMPS Power Supply Metal Casing
Quick Info :
- Input Voltage: 100-120V 60Hz, 220-230V 50Hz
- Output Voltage: 12VDC
- Output Current: 20A (max)
- Dimensions (L X W X H) : 19.5 cm x 10.2 cm x 4.9 cm
Rs 5,290.0012V 20A SMPS Power Supply Metal Casing
Rs 5,290.00 -
-
13.56MHz RFID Key Tag
Quick Info :
- Material: ABS
- Dimension(LxWxH): 43.7×30.5×5.3mm
- Response Frequency: 13.56MHz
- Chip type: FM1108 Fudan Chip
Rs 100.0013.56MHz RFID Key Tag
Rs 100.00 -
1S 18650 Battery SMD PCB Holder
Quick Info :
Size W x L x H : 20.65 mm x 68.88mm x 14.86mm
Rs 300.001S 18650 Battery SMD PCB Holder
Rs 300.00 -
2 Channel 5V DC Relay Module
Quick Info :
- Channel : 2
- Coil sensitivity = 5VDC
- Maximum Contact capacity = 250VAC/10VDC
- Maximum Current capacity = 10A
Rs 590.002 Channel 5V DC Relay Module
Rs 590.00 -
2 Pin Cable JST VHR-2N 3.96mm Pitch
Quick Info:
- Product Name : JST PH
- Wire Type : 22AWG
- Pitch: 3.96mm±0.05
- Length: 15cm
Rs 50.002 Pin Cable JST VHR-2N 3.96mm Pitch
Rs 50.00 -
2 Pin Cable Pair JST-PH 2.00mm Pitch
Quick Info :
- Product Name : JST-PH
- Wire Type : 26AWG
- Pitch: 2.00mm±0.05
- Length: 15cm
Rs 80.002 Pin Cable Pair JST-PH 2.00mm Pitch
Rs 80.00 -
-
2 Pin Connector Pair 2.8mm Pitch
Quick Info :
- Wire Type : 18AWG
- Pitch: 2.80mm±0.05
- Length: 15cm
Rs 120.002 Pin Connector Pair 2.8mm Pitch
Rs 120.00 -
-
2 Way Push Spring Speaker Terminal
Quick Info:
- Rated Load: AC 50V / 3A; Actuating Force: 1 Kgf.
- Color Polarity Coding: Red/Black; Fit Cable: AWG24-16.
- Features: 2 pins, 2 positions, spring load design, push type speaker terminal board.
Rs 60.002 Way Push Spring Speaker Terminal
Rs 60.00