Quick Info :
Ultra-high speed: 20,000 RPM at 3.7V
Coreless design for low noise and high efficiency
Compact size: 6mm diameter x 15mm length
Wide voltage range: 1V to 3.7V operation
Low current consumption: 0.01A
Precision 0.8mm shaft with 3.8mm length
Ready-to-use with 5cm color-coded wire leads
Rs 390.00
Quick Info :
Power requirements : VCC – 5V±0.1
DO output : TTL digital 0 and 1 (0.1 and 5V)
AO output : 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
Detection Gas : Natural gas/Methane
Detection Concentration : 200-10000ppm (Natural gas / Methane)
Rs 590.00
Quick Info :
On-board TTP226 IC
On-board 4 road level indicator.
Working voltage: 2 V to 5.5 V DC
PCB board size: 47.4 (mm) x 46 (mm)
Rs 495.00
Quick info:
3000-count display for precise measurements
AC current measurement up to 600A
AC/DC voltage measurement up to 600V
Resistance testing up to 3MΩ range
Capacitance measurement up to 1mF
Auto-identify diode and continuity testing
LIVE wire detection for enhanced safety
Rs 6,890.00Rs 7,200.00
Quick info:
Charges both Li-ion (4.2V) and LiFePO4 (3.6V) batteries
Adjustable charging current: 0.5A to 2A (default 1A)
Embedded switching regulator for efficient charging
LED indicators: Red (charging), Green (complete)
Multiple protection circuits: overcurrent, over-discharge, overvoltage
Compact design with heat dissipation pad
Easy voltage switching via F solder pad connection
Rs 390.00
Quick Info :
Measures AC voltage up to 250V
Built-in ZMPT101B voltage transformer (1000:1000 ratio)
High galvanic isolation up to 4000V for safety
Wide supply voltage: 5V to 30V DC
Compatible with Arduino, ESP8266, Raspberry Pi
Adjustable analog output for versatile applications
Rs 540.00
Quick Info :
FT232RL+75176 chipset for stable communication
Automatic data flow control – no manual DE/RE control
Supports up to 32 devices on RS485 bus network
Wide baud rate: 300-921600bps with auto-detection
Switchable RS485/TTL modes via 4 jumpers
TVS protection and USB self-recovery features
Self-powered from USB – no external power needed
Rs 950.00
Quick Info :
4 degrees of freedom for flexible arm movement
Compatible with Arduino UNO, MEGA, and Raspberry Pi
Uses 4x SG90 servo motors (may require separate purchase)
Lightweight acrylic/wooden construction for easy assembly
Includes functional claw gripper for object manipulation
Multiple control options: joystick, PC software, custom code
Perfect educational tool for STEM learning and robotics
Rs 2,890.00
Quick Info :
4mm detection distance with ±10% accuracy
Adjustable sensitivity range: 0-3.8mm
Detects magnetic and non-magnetic metals
Built-in LED indication for switched state
IP67 waterproof protection rating
3-wire connection: VCC, GND, NPN NO output
Rs 690.00
Quick Info :
Controls 2 DC motors or 1 stepper motor simultaneously
Wide voltage range: 4.5V to 25V input supply
600mA continuous, 1.2A peak current per channel
Built-in overtemperature and overcurrent protection
PWM speed control and bidirectional rotation
Direct compatibility with Arduino UNO/MEGA 2560
Compact size: 40 x 35.5 x 12.5mm, weighs only 10g
Rs 400.00
Quick Info :
Optocoupler isolation protects control circuits
Wide input range: 3-20V PWM signals
High output capacity: DC 3.7-27V, up to 10A
PWM frequency control: 0-20KHz for speed/brightness adjustment
Compatible with motors, LED strips, pumps, solenoid valves
Compact lightweight design at only 15g
Perfect for Arduino and microcontroller projects
Rs 490.00
Quick Info :
Transistor Type: NPN
Collector-Emitter Voltage (Vce): 80V
Collector-Base Voltage (Vcb): 80V
Emitter-Base Voltage (Veb): 5V
Collector Current (Ic): 15A (maximum)
Power Dissipation (Pd): 100W
Rs 220.00
Quick Info :
Operating Voltage: 3V to 12V
Output Frequency: Variable (based on input)
Output Waveform: Square wave
Output Drive Current: 50mA (max)
Operating Temperature Range: -20°C to +70°C
Rs 590.00
Quick Info :
Operating Voltage Range: 8V to 25V
Oscillator Frequency: 100 kHz
Output Drive Current: 200mA
Max. Duty Cycle: 100%
Start-up Current: 50μA
Rs 45.00
Quick Info :
Operating Voltage Range: 8V to 30V
Oscillator Frequency: 100 kHz
Output Voltage: 5V reference (±2%)
Output Drive Current: 200mA
Max. Duty Cycle: 100%
Rs 45.00
Quick Info :
Transistor Type: NPN
Collector-Emitter Voltage (Vce): 60V
Collector-Base Voltage (Vcb): 80V
Emitter-Base Voltage (Veb): 5V
Collector Current (Ic): 15A (maximum)
Power Dissipation (Pd): 115W
Rs 340.00
Quick Info :
Supply Voltage: 3V to 18V
Maximum Clock Frequency: 5 MHz (typical at Vcc = 5V)
Output Type: BCD (Binary Coded Decimal)
Ripple Blanking: Yes (to eliminate ripple from the outputs)
Counter Type: Decade (0-9)
Maximum Power Consumption: 10mW
Rs 85.00
Quick Info :
Transistor Type: NPN
Collector-Emitter Voltage (Vce): 80V
Collector-Base Voltage (Vcb): 80V
Emitter-Base Voltage (Veb): 5V
Collector Current (Ic): 15A (maximum)
Power Dissipation (Pd): 100W
Rs 70.00
Quick Info :
Operating Voltage: 8V to 35V
Output Voltage: 5V reference (±1% precision)
Oscillator Frequency: 100Hz to 400kHz
Output Current: 200mA (typical)
Duty Cycle Range: 0% to 45%
Error Amplifier Gain: 90dB
Rs 750.00
Quick Info :
Output Voltage: 6V (fixed)
Input Voltage Range: 8V to 35V
Maximum Output Current: 1.5A
Dropout Voltage: 2V
Load Regulation: 100mV
Line Regulation: 3mV/V
Rs 60.00
Quick Info :
Type : 8-Channel Analog Multiplexer/Demultiplexer
Supply Voltage (Vcc) : 3V to 18V
ON Resistance (Ron) : 50Ω (typical at 5V)
Switching Speed : Fast transition times
Control Inputs : 3-bit binary select lines (S1, S2, S3)
Rs 55.00
Quick Info :
Number of Amplifiers : 4
Supply Voltage : ±3V to ±18V
Input Offset Voltage : 3mV
Input Bias Current : 30pA
Gain Bandwidth Product : 3MHz
Rs 50.00
Quick Info :
Transistor Type : PNP
Collector-Emitter Voltage : -40V
Collector-Base Voltage : -40V
Emitter-Base Voltage : -5V
Collector Current : -200mA
Power Dissipation : 625mW
Rs 10.00
Quick Info :
Transistor Type : NPN
Collector-Emitter Voltage : 80V
Collector-Base Voltage : 80V
Emitter-Base Voltage : 5V
Collector Current : 8A
Power Dissipation : 40W
Rs 30.00
Quick Info :
Operating Voltage : 3V to 18V
Current per LED : 2mA to 30mA
Reference Voltage : 1.2V to 12V
Typical Standby Current : 1.5mA
Package Types : DIP-18, SOIC-18
Operating Temperature Range : -40°C to +85°C
Rs 160.00
Quick Info :
Display Type : 10-segment LED/LCD/VFD driver
Package Type : DIP-18, SOIC-18
Logarithmic Scale : 3dB per step
Operating Voltage : 3V to 25V
LED Drive Current : Adjustable
Modes : Bar or dot display selectable
Rs 160.00
Quick Info :
Logic Type : 8-bit static shift register
Package Type : DIP-16, SOIC-16
Operating Voltage : 3V to 15V
Serial Data Input : 1-bit per clock pulse
Parallel Outputs : 8-bit buffered
Low Power Consumption : CMOS technology
Rs 150.00
Quick Info :
Logic Type : 8-bit serial-in, parallel-out shift register
Package Type : DIP-14, SOIC-14
Operating Voltage : 4.75V to 5.25V
Maximum Clock Frequency : 25MHz
Low Power Consumption : Typical 16mA at 5V
Propagation Delay : 18ns
Rs 80.00
Quick Info :
Package Type : TO-92
Voltage Rating : 500V
RMS On-State Current : 1A
Peak Surge Current : 8A (10ms)
Gate Trigger Voltage : ≤ 1.5V
Gate Trigger Current : ≤ 5mA
Rs 10.00
Quick Info :
Voltage Rating : 500V
Package Type : TO-220
RMS On-State Current : 4A
Peak Surge Current : 25A
Gate Trigger Voltage : ≤ 1.5V
Rs 40.00
Quick Info :
Logic Type : 8-bit serial-in, parallel-out shift register
Operating Voltage Range : 3V to 15V
Maximum Clock Frequency : 8MHz
Output Type : Buffered and latched
Propagation Delay : 250ns
Rs 40.00
Specification :
Transistor Type : PNP
Package Type : TO-92
Collector-Emitter Voltage : -25V
Collector-Base Voltage : -40V
Emitter-Base Voltage : -5V
Collector Current : -1.5A max
Rs 15.00
