Skip to content
Quick Info :
Measure range : 0.00-14.00 pH
Resolution : 0.01 pH
Accuracy : +/- 0.01 pH
Rs 1,950.00Rs 2,790.00
Quick Info :
Input voltage reading: 3.5~9V +/-1%
Current output reading: 0.3~3A +/-1%
Dimensions : 72 x 23 13.5 mm
Rs 1,950.00
Quick Info :
Operating Voltage – 3.3V
Analog Output
Leads-Off Detection
Shutdown Pin
Rs 1,590.00
Quick Info :
Type: Flow + Temperature Sensor
Flow Range: 1-30 L/min
Voltage: 5V – 24V DC
Output: 4-Wire (Pulse + NTC)
Connection: G1/2″ Thread
Rs 1,450.00Rs 1,650.00
Quick info:
Thermocouple Type : K-Type
Temperature Range : 0°C to 1024°C
Communication Interface : SPI (SO, SCK, CS)
Operating Voltage : 3.0V to 5.5V
Rs 1,050.00Rs 1,100.00
Quick Info :
Single-Supply Operation (2.7V to 5.5V)
Best Detection Range: 10mm
High-Resolution Conversion of Light Intensity to Frequency
Programmable Color and Full-Scale Output Frequency
Rs 990.00Rs 1,290.00
Quick Info :
Temperature range: -50 -110°C
Dimensions: 48.5 * 40mm
Temperature control mode: ON / OFF
Control accuracy: 0.1 °C
Output voltage: DC 12V
Rs 750.00
Quick Info :
This infrared sensor trio detector and trio output Build-in TCRT5000 sensor
Number of channels : 3
Rs 750.00
Quick Info :
Chip : MPU-6050
Communication : I2C
Operating Voltage : 3-5V
Axes : 6 (Gyro + Accel)
ADC Resolution : 16-bit
Rs 730.00Rs 790.00
Quick Info :
4mm detection distance with ±10% accuracy
Adjustable sensitivity range: 0-3.8mm
Detects magnetic and non-magnetic metals
Built-in LED indication for switched state
IP67 waterproof protection rating
3-wire connection: VCC, GND, NPN NO output
Rs 690.00
Quick Info :
Sensing distance : 5mm
Operating voltage : 10 – 30 VDC
Response frequency : 800Hz
Output method : PNP, 150mA load
Rs 690.00
Quick Info :
Sensing distance: 5mm
Operating voltage: DC 10-30V
Screw hole : 3.2mm, Pitch : 10.5mm
Wire length : 100cm (39-inch)
Rs 690.00
Quick Info :
3V-6V DC Supply Voltage
On-board LDO Voltage regulator
Built-in Voltage level convertor (MOSFET based)
It can be interface with 3.3V or 5V Microcontroller.
Rs 650.00Rs 690.00
Quick Info :
Voltage: 220V AC
Max Current: 10A
Function: Auto Dusk-to-Dawn
Feature: Weatherproof Design
Use: Street/Garden Light Automation
Rs 590.00Rs 650.00
Quick Info :
Measures AC voltage up to 250V
Built-in ZMPT101B voltage transformer (1000:1000 ratio)
High galvanic isolation up to 4000V for safety
Wide supply voltage: 5V to 30V DC
Compatible with Arduino, ESP8266, Raspberry Pi
Adjustable analog output for versatile applications
Rs 590.00
Quick Info :
LCD Size: 35.7*16.8mm
Operation Temperature: -15°c to 70°c
Humidity measurement range: 10%~99%
Rs 590.00
Quick Info :
Senses Bus Voltages : 0 V to 36 V
High-Side or Low-Side Sensing
Reports Current, Voltage, and Power
Operates from 2.7-V to 5.5-V Power Supply
Rs 590.00Rs 900.00
Quick Info :
Power Requirements: 2.7 to 6.5 VDC
Communication Interface: I²C (up to 400 kHz)
Operating temperature: -22 to +185 °F to +85 °C)
Dimensions: 0.73 x .65 in ( 1.8 x 1.7 cm)
Rs 580.00Rs 850.00
Quick Info :
Power supply: 3-5v (Recommended 3.3v)
Communication mode: Standard IIC/SPI communication protocol
Chip built in AD 16bit converter, 16 bit data output
Gyro range: ±125 ±250 ±500 ±1000 ±2000 degrees /s
Rs 550.00Rs 750.00
Quick Info :
Operating Voltage: 12V DC
Module Dimensions: 5cm x 2.7cm x 2cm
Sensor: Photosensitive resistance module
Rs 550.00Rs 650.00
Quick Info :
On-board TTP226 IC
On-board 4 road level indicator.
Working voltage: 2 V to 5.5 V DC
PCB board size: 47.4 (mm) x 46 (mm)
Rs 495.00
Quick Info :
Optical sensor: IR and red LED combined with a photodetector
Measures absorbance of pulsing blood
I2C interface plus INT pin
3.3V power supply complete pulse oximeter and heart rate sensor solution, simplifies design, integrated LEDs, photo sensor, and high-performance analog front
Rs 490.00
Quick Info :
Power : 3 to 5VDC
Pressure sensing range : 300- 1100 h Pa (9000m to -500m above sea level)
This board/chip uses I2C 7-bit address 0x77.
Rs 450.00
Quick Info :
Operating Voltage is +5V
Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
Analog output voltage: 0V to 5V
Digital Output Voltage: 0V or 5V (TTL Logic)
Rs 420.00Rs 490.00
Quick Info :
Operating voltage range : DC 4.5-20V
Sensing distance : 3 meters
Delay Time : The default 8S + -30%
Rs 400.00
Quick Info :
The current sensor chip : ACS712
Current measuring : up to 30A
5V power supply, on-board power indicator
Rs 400.00Rs 550.00
Quick Info :
The current sensor chip : ACS712
Current measuring : up to 5A
5V power supply, on-board power indicator
Rs 350.00Rs 550.00
Quick Info :
The current sensor chip : ACS712
Current measuring : up to 20A
5V power supply, on-board power indicator
Rs 350.00Rs 550.00
Quick Info :
Operating Voltage : 1.8v – 3.6v DC
Temperature Sensor Range : -40-80°C
Accuracy : 1.0 °C
Resolution : 0.01°C
Barometric Pressure Sensor Range : 30,000 – 110,000 Pa
Rs 300.00Rs 390.00
Quick Info:
Operating Voltage : 3.3V – 5V DC
Carrier Frequency : 38kHz
Remote Buttons : 21
Effective Range : Up to 8 metres
Reception Angle : ~45°
Output Type : Digital
Compatibility : Arduino, Raspberry Pi, ESP32
Rs 290.00Rs 350.00
Quick info :
Operating voltage: 3.3V~5V
Interface: PH2.54-3P
Rs 290.00
Quick Info :
Operating Voltage: 5V DC
Current Draw: 8mA
Dimensions: 18 x 15 x 5 mm (L x W x H)
Rs 290.00
Quick Info:
Measuring Range : 2cm to 400cm
Accuracy : ±3mm
Operating Voltage : 5V DC
Interface : 4-pin (VCC, Trig, Echo, GND)
Rs 280.00Rs 430.00
Quick Info :
Usable temperature range: -55 to 125°C (-67°F to +257°F)
Usable with 3.0V to 5.5V power/data
Stainless steel tube 6mm diameter by 30mm long
Cable is 36″ long / 91cm, 4mm diameter (1 Meter Long)
Rs 260.00
Quick Info :
Operating voltage: 3.3V~5V.
Adjustable sensitivity (shown in blue digital potentiometer adjustment)
Dual output mode,analog output more accurate.
A fixed bolt hole for easy installation.
With power indicator (red) and digital switching output indicator (green).
Rs 250.00Rs 300.00
