Electromechanical
Electromechanical modules: KY-012 active and KY-006 passive buzzers, key switch module, 40A automotive relays and SSR-25 DA, DD and VA solid-state relays.
-
SSR-25VA Solid State Relay 25A 24-380VAC
Quick Info:
- Control Type : Variable Resistor (Potentiometer)
- Control Resistance : 470K to 560K Ohm
- Load Current : 25A
- Load Voltage : 24-380VAC
- Control Method : Phase Control
Rs 2,350.00Rs 2,850.00SSR-25VA Solid State Relay 25A 24-380VAC
Rs 2,350.00Rs 2,850.00 -
SSR-25DD Solid State Relay 25A DC to DC
Quick Info:
- Control Type : DC to DC
- Input Voltage : 3-32VDC
- Load Voltage : 5-60VDC
- Load Current : 25A
- Mounting : Bolt Fixing
Rs 2,750.00Rs 2,950.00SSR-25DD Solid State Relay 25A DC to DC
Rs 2,750.00Rs 2,950.00 -
SSR-25DA Solid State Relay 25A DC to AC
Quick Info:
- Control Type : DC to AC
- Input Voltage : 3-32VDC
- Load Voltage : 24-380VAC
- Load Current : 25A
- Trigger Method : Zero-Cross
Rs 2,350.00Rs 2,850.00SSR-25DA Solid State Relay 25A DC to AC
Rs 2,350.00Rs 2,850.00 -
Automotive Relay 40A 12V / 24V 4 / 5 Pin
Quick Info:
- Current Rating : 40A
- Coil Voltages : 12V / 24V DC
- Pin Configurations : 4-Pin / 5-Pin
- 4-Pin : Normally Open (NO)
- 5-Pin : NO & Normally Closed (NC)
- Application : Automotive & Marine
Price range: Rs 520.00 through Rs 570.00 -
KY-012 Active Buzzer Module
Quick Info:
- Buzzer Type : Active (Built-in Oscillator)
- Trigger Type : Low Level
- Operating Voltage : 3.3V – 5V
- Operating Current : <30mA
- Output Frequency : ~2.5kHz (fixed)
- Interface Pins : 3 (Signal, VCC, GND)
- Compatibility : Arduino, ESP32, Raspberry Pi
- PCB Size : 18.5mm × 15mm
Rs 100.00Rs 150.00KY-012 Active Buzzer Module
Rs 100.00Rs 150.00 -
KY-006 Passive Buzzer Module
Quick Info:
- Buzzer Type : Passive (tone controlled via code)
- Trigger Type : High Level
- Operating Voltage : 3.3V – 5V
- Operating Current : <25mA
- Frequency Range : 1.5kHz – 2.5kHz
- Interface Pins : 3 (Signal, VCC, GND)
- Compatibility : Arduino, ESP32, Raspberry Pi
- PCB Size : 18.5mm × 15mm
Rs 100.00Rs 150.00KY-006 Passive Buzzer Module
Rs 100.00Rs 150.00 -
KY-004 Key Switch Module
Quick Info:
- Operating Voltage : 3.3V – 5V DC
- Output Type : Digital (HIGH / LOW)
- Interface : 3-Pin (Signal, VCC, GND)
- Idle Output : HIGH
- Pressed Output : LOW
- Onboard Resistor : Yes
- Compatible With : Arduino, Raspberry Pi, ESP32
Rs 150.00Rs 200.00KY-004 Key Switch Module
Rs 150.00Rs 200.00
Buzzer modules (an active buzzer beeps on its own, a passive one plays tones from PWM), the KY-004 key switch module, 12V and 24V 40A automotive relays with 4 and 5 pins, and 25A solid-state relays: SSR-25DA (DC control, AC load), SSR-25DD (DC to DC) and SSR-25VA (variable AC). Solid-state relays need a heat sink at higher currents.