Alphatronic
-
SATA 15 Pin Right Angle Male Connector
Quick Info:
- Connector Type : SATA Power, 15-Pin Male
- Orientation : Right Angle
- Termination : Crimp/IDC Type
- Compatibility : 3.5″ HDD, 2.5″ SSD, SATA Optical Drives
Rs 120.00Rs 150.00SATA 15 Pin Right Angle Male Connector
Rs 120.00Rs 150.00 -
1W RGB High Power LED 6-Pin Heat Sink
Quick Info:
- Total Power : 1W
- Pin Configuration : 6-Pin (RGB)
- Forward Current : 350mA per Channel
- Base Type : 20mm Aluminum Star PCB
Rs 240.00Rs 300.001W RGB High Power LED 6-Pin Heat Sink
Rs 240.00Rs 300.00 -
M6 Brass Knurled Threaded Insert
Quick Info:
- Thread Size : M6 x 1.0mm
- Length : 8mm
- Outer Diameter : 8mm
- Material : Brass
Rs 50.00M6 Brass Knurled Threaded Insert
Rs 50.00 -
M5 Brass Knurled Threaded Insert
Quick Info:
- Thread Size : M5 x 0.8mm
- Outer Diameter : 7mm
- Material : Brass
- Installation Method : Heat-Set (Soldering Iron or Heat Press)
Price range: Rs 30.00 through Rs 40.00M5 Brass Knurled Threaded Insert
Price range: Rs 30.00 through Rs 40.00 -
M4 Brass Knurled Threaded Insert
Quick Info:
- Thread Size : M4 x 0.7mm
- Outer Diameter : 6mm
- Material : Brass
- Installation Method : Heat-Set (Soldering Iron or Heat Press)
Price range: Rs 20.00 through Rs 30.00M4 Brass Knurled Threaded Insert
Price range: Rs 20.00 through Rs 30.00 -
UPS HAT for Raspberry Pi
Quick Info:
- Interface : Standard 40-Pin GPIO Extension Header
- Output Voltage : 5V
- Max Continuous Output Current : 2.5A
- Protection Features : Overcharge, Over-Discharge, Over-Current, Short-Circuit
Rs 7,300.00Rs 7,850.00UPS HAT for Raspberry Pi
Rs 7,300.00Rs 7,850.00 -
MH-Z19 NDIR CO2 Gas Sensor Module
Quick Info:
- Detection Principle : Non-Dispersive Infrared (NDIR)
- Detection Range : 400 to 5000 ppm CO2
- Output Signal : UART & PWM
- Operating Voltage : 5V DC
Rs 7,750.00Rs 7,950.00MH-Z19 NDIR CO2 Gas Sensor Module
Rs 7,750.00Rs 7,950.00 -
M348 Wireless Rechargeable Mouse
Quick Info:
- Connection Modes : 2.4GHz Wireless / Bluetooth / Wired Type-C (tri-mode)
- Battery : 500mAh rechargeable
- Click Type : Silent
- Color: Black
Rs 2,350.00Rs 2,750.00M348 Wireless Rechargeable Mouse
Rs 2,350.00Rs 2,750.00 -
6mm LED Pilot Light Metal Flat Head
Quick Info:
- Mounting Hole : 6mm
- Head Shape : Flat
- Body Material : Metal
- Voltage : 12V DC
Rs 220.00 -
6mm LED Pilot Light Metal Round Head
Quick Info:
- Mounting Hole : 6mm
- Head Shape : Round
- Body Material : Metal
- Voltage : 12V DC
Rs 220.00 -
Nylon Plastic Bolt M3 Variable Lengths
Quick Info:
- Thread Size : M3
- Length : 10mm
- Material : Nylon 66 (Polyamide)
- Electrical Property : Non-Conductive
Rs 10.00 -
ANENG MH10 Insulation Resistance Tester
Quick Info:
- Insulation Resistance Range : 0.1MΩ – 2000MΩ
- Output Test Voltage : 100V / 250V / 500V / 1000V
- AC Voltage Measurement Range : 1V – 750V
- Power Supply : 6 x 1.5V AA Batteries (not included)
Rs 19,850.00Rs 22,000.00ANENG MH10 Insulation Resistance Tester
Rs 19,850.00Rs 22,000.00 -
Ethernet Network Cable Extender RJ45 Vention
Quick Info:
- Interface : Cat6 / RJ45
- Connector Type : Female to Female
- Contact Material : Gold-Plated Phosphor Bronze
- Data Rate : Up to 1000 Mbps
Rs 750.00Rs 975.00Ethernet Network Cable Extender RJ45 Vention
Rs 750.00Rs 975.00 -
Rs 64,900.00
Rs 67,000.00Raspberry Pi 4 Model B 8GB
Rs 64,900.00Rs 67,000.00 -
Coreless Micro DC Motor 8x16mm 3.7V
Quick Info:
- Operating Voltage : DC 3.7V
- No-Load Speed : 50,000 RPM
- Motor Diameter : 8mm
- Motor Length : 16mm
Rs 880.00Rs 975.00Coreless Micro DC Motor 8x16mm 3.7V
Rs 880.00Rs 975.00 -
K202 Fingerprint Control Board DC12V Relay
Quick Info:
- Model : K202
- Power Supply : DC12V
- Output : Relay, max 10A
- Fingerprint Capacity : 120 templates
- Relay Time : Adjustable, 0.5 to 13 seconds
Rs 3,850.00Rs 4,250.00K202 Fingerprint Control Board DC12V Relay
Rs 3,850.00Rs 4,250.00 -
LM317 Adjustable Linear Regulator 4.5-40V
Quick Info:
- IC : LM317
- Input Voltage : 4.5V to 40V DC
- Output Voltage : 1.25V to 37V DC (adjustable)
- Output Current : Up to 1.5A (2.2A peak)
- Protection Features : Current limiting, thermal overload protection
Rs 280.00Rs 350.00LM317 Adjustable Linear Regulator 4.5-40V
Rs 280.00Rs 350.00 -
3D Printed Pegboard Tool Holder
Quick Info:
- Material : PLA+
- Colours : Red / White / Black
- Attachment : Tool-free pegboard clip
- Compatible With : 22×22cm Modular Pegboard
- Suitable For : Pliers, cutters, screwdrivers, scissors, wrenches
- Hook Opening : Wide — multi-handle compatible
- Print Method : FDM 3D printing
Rs 550.00Rs 650.003D Printed Pegboard Tool Holder
Rs 550.00Rs 650.00


















