Quick Info :
Connector : Male to Female
1 Cable : Rs. 5
1 Set (40pcs) : Rs. 200
Rs 5.00
Quick Info :
Connector Type : Male to Male
Wire Length : 10cm
Wire Gauge : 24 AWG
Quantity : 40 wires (1x40P ribbon)
Rs 5.00
Quick Info :
Working Voltage : DC 5V~24V
Flow Rate Range : 1~30L/min
Load Capacity: ≤10mA (DC 5V)\
Water Inlet/ Outlet Diameter : 0.5 inch
Rs 1,590.00
Quick Info :
2 LEDs
2 buttons circuit
170 mini breadboard
Rs 500.00
Quick Info :
16 Channel
Maximum switching voltage: 250VAC / 30VDC
Maximum switching current: 10A
Module operating voltage: 5V
Rs 2,350.00Rs 2,950.00
Quick Info :
Model : KY-040
Rotation : Continuous 360°, unlimited
Detents Per Revolution : 20
Push Button : Integrated, normally open
Working Voltage : 0V to 5V
Rs 350.00
Quick Info :
Working Voltage : 3 – 5.5V.
The maximum Current : 49mA 5V.
Range : 20cm to 800 cm
Rs 1,550.00Rs 1,750.00
Quick Info :
Compatible Motors: Nema 17/23/34(42/57/86 Stepper Motor)
9V-42V DC power supply;
H-bridge bipolar constant-phase flow-driven;
maximum output current of 4.0A eight optional
Rs 2,050.00Rs 2,200.00
Quick Info :
Supply Voltage: 2.6V to 5.5V
Average active ranging sensor current: 19mA
Interface: I2C
Dimension: 13mm x 11mm
Rs 790.00Rs 1,250.00
Quick Info :
Power Input : 3.0V-5.5V
Up to +26V target voltage
0.1 ohm 1% 2W current sense resistor
Rs 420.00Rs 950.00
Quick Info :
Operating Voltage : 3.5V to 5.5V
Temperature Range : -40°C to 80°C
Humidity Range : 0% to 100%
Rs 360.00Rs 570.00
Quick Info:
Current : 0A ~ 6A
Operating Voltage : 0V ~ 15.2V
Power : 60W
Temperature Range : -30C to 70C
Rs 780.00Rs 850.00
Quick Info :
Operating Voltage : 4.75V to 28V
Continuous Current : 2A RMS
Peak Current : 2.8A
Microstepping : Up to 1/256
Interface : STEP/DIR & UART
Rs 1,450.00Rs 3,250.00
Quick Info :
Size : 2.4 inch
Resolution : 240 x 320 pixel
Touch : Resistive
Suitable for an Uno (Atmega328P) or Mega (Atmega2560) based Arduinos (other chips are not supported)
Dimensions: 72.5 mm x 53 mm
Driver: ILI9320 or ILI9341 (or compatible with one of two)
Rs 1,780.00Rs 1,950.00
Quick Info :
Chip: ESP32 dual-core (240MHz)
Memory: 4MB Flash, 520KB SRAM
Camera: OV2640 2MP (up to 1600×1200)
Storage: MicroSD card slot
Connectivity: WiFi 802.11n + Bluetooth 4.2
Frame Rate: Up to 60fps at VGA
Programming: Arduino IDE, ESP-IDF (requires USB-TTL adapter)
Power: 5V DC
Note: External programmer required
Rs 2,250.00Rs 2,690.00
Quick Info :
Chip: ESP32-WROOM-32
Processor: Dual-core 240 MHz
Connectivity: WiFi + Bluetooth 4.2
GPIO: 30 pins
USB: CP2102 with Micro USB
Flash: 4 MB
Voltage: 3.3V operating, 5V input
Rs 1,350.00Rs 1,450.00
Quick Info :
Operating temperature range: -40 TO 85°CUART TTL socket
EEPROM to save configuration settings
Rechargeable battery for Backup
Supply voltage: 3.3 V
Rs 1,100.00Rs 1,800.00
Quick Info :
Operating Voltage: 5V DC
Current Draw: 8mA
Dimensions: 18 x 15 x 5 mm (L x W x H)
Rs 290.00
