Quick Info :
Type : Normally Closed (NC)
Material : Brass / Plastic
Inlet/Outlet Size : 1 inch (25mm) BSP/NPT Thread
Working Medium : Water, Air, Low Viscosity Fluids
Operating Voltage : 12V DC
Current Consumption : ~0.5A to 1A
Rs 1,090.00
Quick Info :
Channel : 8
Coil Voltage : 5V DC
Trigger Logic : Active LOW
Contact Rating : 10A / 250VAC, 30VDC
Isolation : Optocoupler
Rs 1,100.00Rs 1,400.00
Quick Info :
Operating temperature range: -40 TO 85°CUART TTL socket
EEPROM to save configuration settings
Rechargeable battery for Backup
Supply voltage: 3.3 V
Rs 1,100.00Rs 1,800.00
Quick Info :
Input Voltage: 12V DC
Relay Max Load: 10A
Frequency: 433MHz RF
Modes: 4 Modes (Toggle, Momentary, Latching, Delay)
Use: Remote Automation (Lights, Pumps, Gates)
Rs 1,100.00Rs 1,350.00
Quick Info:
IC : CN3722
Type : MPPT Solar Charge Controller
Battery : 3S Li-Ion 18650
Charge Voltage : 12.6V
Solar Input : Up to 25V
Package : 1 × Module
Rs 1,100.00Rs 1,125.00
Quick Info :
Wi-Fi Module : ESP-12E (ESP8266)
Clock Speed : 80MHz – 160MHz
Flash Memory : 4MB
GPIO Pins : 17 (11 Usable)
Operating Voltage : 3.3V
Rs 1,150.00Rs 1,450.00
Quick Info :
Length X Width : 12cm X 8 cm
Thickness : 1.6 mm
Type: Copper Clad PCB Board
Material: Epoxy Resin (FR4)
Copper Layer: Double-Sided
Size: A4
Copper Thickness: ~35µm
Rs 1,150.00
Specifications :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 24V
Output Current: 1A
Plug Type : UK Plug
Rs 1,150.00
Quick Info :
Comprehensive BMS protection: overcharge, over-discharge, overcurrent
Compatible with various Li-ion batteries (18650, 26650, polymer)
4.2V charging cutoff with 2.5V discharge protection
Automatic cell balancing for multi-cell configurations
Rs 1,150.00Rs 1,350.00
Quick Info :
Size : 2.5 mm × 1.5 m
Type : Solder Wick (BK-2515)
Material : Copper braid
Feature : No-clean flux, fast desoldering
Rs 1,150.00Rs 1,300.00
Quick Info :
Width: 20 mm
Length: 30 meters
Material: Polyimide
Heat Resistance: Up to 260°C
Silicone Adhesive
Rs 1,150.00Rs 1,400.00
Quick Info :
Chip: NXP PN532
Frequency: 13.56MHz
Range: 5-7cm read/write
Interface: I2C/SPI/UART (selectable)
Cards: Mifare, NTAG, NFC, FeliCa
Voltage: 3.3V – 5V
Compatible: Arduino, Raspberry Pi, ESP32
Function: Read & Write NFC/RFID tags
Rs 1,150.00Rs 1,350.00
Quick Info:
Model : LJ18A3-8-Z/BX
Housing : 18mm Barrel
Sensing Distance : 8mm
Output : NPN Normally Open (NO)
Supply Voltage : 6V – 36V DC
Max Current : 300mA
Package : 1 × Sensor
Rs 1,150.00Rs 1,250.00
