Skip to content
Quick Info:
Display : 1.3″ OLED, SH1106, 128×64, white monochrome
Interface : I²C (0x3C / 0x3D selectable)
Pull-up Resistors : 4.7kΩ onboard
Encoder : EC11 — 20 pulses / 20 detents
Encoder Input : Rotate (TRA/TRB) + Push (PSH)
Navigation Buttons : CON (confirm) + BAK (back)
Operating Voltage : 3.3V DC
Compatible : Arduino / ESP32 / Raspberry Pi / STM32
Libraries : U8g2 / Adafruit SSD1306
Rs 1,450.00Rs 1,850.00
Quick Info :
Model: G2R-2
Coil Voltage: 24VDC
Contact Form: DPDT (2c)
Switching Current: 5A
Mounting: PCB Terminals
Rs 650.00Rs 750.00
Quick Info:
Plate Type : V Gantry Plate (Type B)
Compatible Extrusion : 2020 V-Slot
Mounting Holes : 5x Pre-Threaded M5
Rs 1,950.00Rs 2,100.00
Quick Info:
Model : OPT101 (CJMCU-101)
Supply Voltage : 2.7V to 36V
Responsivity : 0.45A/W (650nm)
Bandwidth : 14KHz
Rs 3,250.00Rs 4,500.00
Quick Info :
Input: Micro USB Male
Output: USB-A Female
Data Transfer Rate: Supports USB 2.0 standard with speeds up to 480 Mbps.
Length : 12cm
Color : Black
Rs 200.00
Quick Info:
Sensor : OmniVision OV3660
Resolution : 3 Megapixels (HD)
Lens Angle : 160°
Cable Length : 75mm (FFC)
Interface : DVP 24-PIN
Output Format : YUV, RGB
Compatible Boards : ESP32-CAM, ESP32-S3
Driver Support : Espressif esp32-camera library (native)
Rs 2,750.00Rs 2,950.00
Quick Info:
Image Sensor : OV3660
Resolution : 3MP
Field of View : 66 Degrees
IR Wavelengths : 650nm / 850nm
Night Vision : Yes
Connector : 24-Pin FPC, 0.5mm Pitch, 75mm Cable
Compatibility : ESP32-CAM
Rs 2,300.00Rs 2,500.00
Quick Info :
Resolution 640×480 VGA
Flicker (50/60 Hz) auto detection
Onboard regulator, only single 3.3V supply needed
Rs 680.00Rs 925.00
Quick Info:
Supply Voltage: 5VDC
3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 130.00
Quick Info :
Maximum output power: 3W*2(5V 4Ω)
Built with switch Potentiometer
Rs 290.00Rs 320.00
Quick Info :
5W Output at 10% (Total Harmonic Distortion ) THD with a 2Ω Load and 5V Power Supply at Class-D Mode
3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 290.00Rs 390.00
Quick Info :
Main Chip: PAM8610
Power Range: DC 6V-15V (self-protection)
Recommended Voltage: DC 12V(2A)
Output Power: 10Wx2(8Ω) 15Wx2(4Ω)
Rs 450.00
Quick Info :
Chip: PAM8610 Class D
Power: 10W × 2 channels
Voltage: DC 7.5-15V (12V optimal)
Efficiency: 90%
THD: 0.1% (Ultra-low distortion)
Rs 550.00Rs 650.00
Quick Info :
Voltage: 12V DC
Color: Red
Mounting: 6mm diameter
Style: Flat head
Wire Length: 15cm pre-wired
Use: Panel indicators, status lights, automotive
Rs 200.00Rs 220.00
Quick Info :
Model : PBS-11B
Mounting Hole Diameter : 12 mm
Type : Momentary
Colours : Red / Green / Yellow / Blue / Black
Rs 40.00Rs 60.00
Quick Info :
Model : PBS-11A
Mounting Hole Diameter : 12 mm
Type : Toggle Latch style push button
Colours : Red / Green / Yellow / Blue
Rs 40.00Rs 60.00
Quick Info :
Voltage Range: DC 5 V – 120 V
Display: 3-digit LED
Accuracy: ±1%
Connection: 2-wire
Cutout Size: 45 mm x 26 mm
Rs 380.00Rs 450.00
Quick Info :
Operating Voltage : 3V – 5V (typical 5V)
Current Consumption : ≤30mA
Rated Frequency : 1kHz – 3kHz (typically 2kHz)
Sound Output : 85dB @ 10cm (varies by model)
Drive Method : Requires external PWM signal
Rs 55.00