-
Breadboard 400TP (Small)
Quick Info :
- Type: Solderless Breadboard
- Tie Points: 400
- Rows & Columns: 2 Power Rails + 30 Rows (5 Points per Row)
- Pitch: 2.54mm (0.1 inch)
- Material: ABS plastic with nickel-plated contacts
Rs 200.00Breadboard 400TP (Small)
Rs 200.00 -
XT60 Connector Pair Male & Female
Quick Info:
- Connector Type : XT60 (Male & Female pair)
- Rated Current : 60A continuous
- Contact Material : Gold-plated copper
- Housing Material : Nylon (high-temperature resistant)
- Locking Mechanism : Self-locking, polarity-keyed
Rs 200.00XT60 Connector Pair Male & Female
Rs 200.00 -
Sound Sensor Module
Quick Info :
- Operating voltage : 3.3 V
- Operating current : 4~5 mA
- Signal to noise ratio : 54 dB
Rs 200.00 -
Rain Drop Sensor Module
Quick Info
- Working voltage : 5V
- Output format : Digital switching output (0 and 1), and analog voltage output AO
- Potentiometer adjust the sensitivity
- Uses a wide voltage LM393 comparator
Rs 200.00Rs 230.00Rain Drop Sensor Module
Rs 200.00Rs 230.00 -
MB102 Breadboard Power Supply Module 3.3V/5V
Quick Info :
- Input voltage: 7-12 V (DC) or 5V USB power supply.
- Output voltage: 3.3V and 5V can switch over.
- Maximum output current: <700 mA.
Rs 200.00Rs 280.00MB102 Breadboard Power Supply Module 3.3V/5V
Rs 200.00Rs 280.00 -
NRF24L01 2.4GHz Transceiver Adapter Base
Quick Info :
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
Rs 200.00Rs 250.00NRF24L01 2.4GHz Transceiver Adapter Base
Rs 200.00Rs 250.00 -
AT24C256 I2C interface EEPROM Memory Module
Quick Info:
- Onboard chip AT24C256 chip
- Onboard the I2C communications required pull-up resistor
- All pins are leads and marked
- PCB board Dimensions : 36.5 (mm) x12 (mm)
Rs 200.00Rs 390.00AT24C256 I2C interface EEPROM Memory Module
Rs 200.00Rs 390.00 -
Keypad Flexible 16 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 16-key membrane switch pad has 8 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 200.00Rs 290.00Keypad Flexible 16 Keys
Rs 200.00Rs 290.00 -
KY-023 Dual-Axis XY Joystick Module
Quick Info:
- Input Voltage : 3.3V to 5V DC
- Output Signal : 2 analog (X, Y) + 1 digital (switch)
- Pin Interface : VCC, GND, VRx, VRy, SW
- Dimensions : 34mm x 26mm x 32mm
Rs 200.00Rs 250.00KY-023 Dual-Axis XY Joystick Module
Rs 200.00Rs 250.00 -
TM1637 4 Digit LED Display Module
Quick Info :
- Four 7-Segment LED Displays with 0.36″ high red digits
- Built-in TM1637 LED Driver
- 2-wire serial interface for easy hookup to uC
- 3.3 and 5V compatible
Rs 200.00Rs 390.00TM1637 4 Digit LED Display Module
Rs 200.00Rs 390.00 -
PCF8574 LCD to I2C Adapter Board
Quick Info :
- IC Chip : PCF8574 / PCF8574T
- Compatible Displays : 1602 (16×2) & 2004 (20×4) LCD Modules
- I2C Address : 0x20 to 0x27 (jumper selectable)
- Operating Voltage : 2.5V to 6V
Rs 200.00Rs 390.00PCF8574 LCD to I2C Adapter Board
Rs 200.00Rs 390.00 -
MAX485 RS485 to TTL Converter Module
Quick Info :
- IC Chipset : MAX485
- Operating Voltage : 5V DC
- Communication Standard : RS-485 (EIA-485)
- Max Nodes on Bus : 32 Transceivers
- Max Communication Distance : Up to 1200m
Rs 200.00Rs 220.00MAX485 RS485 to TTL Converter Module
Rs 200.00Rs 220.00 -
18650 2S PCB Battery Holder BK-18650-PC4
Quick Info :
- Model: BK-18650-PC4
- Cells: 2 × 18650 (2S series)
- Voltage Output: 7.4V nominal
- Mounting: PCB through-hole
- Contacts: Spring-loaded
- Material: Flame-retardant plastic
- Current: Up to 5A continuous
Rs 190.00Rs 220.0018650 2S PCB Battery Holder BK-18650-PC4
Rs 190.00Rs 220.00 -
Microwave Radar Sensor Module RCWL-0516
Quick Info :
- Type: Microwave Radar Motion Sensor
- Voltage: 4-28V DC
- Range: 5-7 meters
- Output: 3.3V Digital
- Detection: 360° Omnidirectional
Rs 190.00Rs 300.00Microwave Radar Sensor Module RCWL-0516
Rs 190.00Rs 300.00 -
GT2 20T Timing Pulley 8mm Bore
Quick Info :
- Type : GT2 Pulley
- Teeth : 20T
- Bore : 8mm
- Material : Aluminum Alloy
Rs 190.00Rs 250.00GT2 20T Timing Pulley 8mm Bore
Rs 190.00Rs 250.00 -
-
N20 D-Hole Rubber Wheel 43mm 43x19x3mm
Quick Info :
- Dimensions: 43x19x3mm
- Material: Rubber and Plastic
Rs 190.00N20 D-Hole Rubber Wheel 43mm 43x19x3mm
Rs 190.00 -
Terminal Connector With Right Angle PCB Base 5.08mm 2-12 Pin
Quick Info :
- Pin Pitch: 5.08mm
- Pole Range: 2-Pin to 12-Pin
- Orientation: Right Angle
- Rating: 15A / 300V
- Function: Quick Disconnect Wire-to-Board
Price range: Rs 40.00 through Rs 190.00Terminal Connector With Right Angle PCB Base 5.08mm 2-12 Pin
Price range: Rs 40.00 through Rs 190.00
