Quick Info :
Transistor Type: NPN
Collector-Emitter Breakdown Voltage (Vceo): 230V
Power Dissipation (Pd): 180W
DC Current Gain (hFE@Ic,Vce): 70@5A,4V
Collector Current (Ic): 17A
Rs 690.00
Quick info :
Battery Type: Lithium Ion
Model: 16340
Capacity: 1400mAh
Rs 690.00
Quick info :
Output Power: 2x50W (stereo mode) or 100W (mono mode)
Frequency Response: 20Hz to 20kHz
Signal-to-Noise Ratio (SNR): ≥100dB
Chip: TPA3116D2
Power Supply Voltage: 12-24V DC
Rs 690.00
Quick Info :
Length: 5 inches (125mm)
Blade Material: Hardened Carbon Steel / Stainless Steel
durable blades for clean and accurate cuts.
Made from high-quality materials for long-lasting performance.
Flush-cut or semi-flush (for clean, precise cuts)
Rs 690.00
Quick Info :
Power Rating: 60W
Voltage: 110V / 220V
temperature Range: 200°C – 500°C
Installation: Easy plug-and-replace design
Heating Time: Quick heat-up within 30-60 seconds
Rs 690.00
Quick Info :
Model: KW-401
Maximum Power: 130 Watts (MAX)
Nominal Power: 65 Watts (RMS)
Impedance: 40HM
Frequency Response: 100 Hz – 18,000 Hz
Material: Metal frame with paper cone
Rs 690.00
Quick Info :
Battery Type : Lithium Polymer (LiPo)
Nominal Voltage : 3.7V DC
Capacity : 250mAh
Charging Voltage : 4.2V ± 0.05V
Discharge Cutoff Voltage : ~3.0V
Continuous Discharge Rate : ~1C – 2C
Max Discharge Current : ~250mA – 500mA
Rs 690.00
Specification :
Model : SD-A601
Color Options : White
Power Consumption : 20W
Input Voltage Range : 100V to 240V AC
Frequency : 50-60Hz
Melt Temperature : Approximately 190°C (±10°C)
Rs 690.00
Quick Info :
4mm detection distance with ±10% accuracy
Adjustable sensitivity range: 0-3.8mm
Detects magnetic and non-magnetic metals
Built-in LED indication for switched state
IP67 waterproof protection rating
3-wire connection: VCC, GND, NPN NO output
Rs 690.00
Quick Info :
Input Voltage : AC 220 ~ 240V 50/60 HZ
Output Voltage: DC 5V
Output Current: 3A
Output type: Micro USB
Rs 700.00
Quick Info :
Supply Voltage – Max: 18 V
Supply Voltage – Min: 6.5 V
Gain: 32 dB
Number of Channels: 2
Channel Operating Supply Current: 2 A
Rs 720.00
Quick Info :
OLED Driver IC: SSD1306
Resolution: 128 x 64
Visual Angle: >160°
Input Voltage: 3.3V ~ 6V
Compatible I/O Level: 3.3V, 5V
Rs 750.00Rs 990.00
Quick Info :
Single-Supply Operation (2.7V to 5.5V)
Best Detection Range: 10mm
High-Resolution Conversion of Light Intensity to Frequency
Programmable Color and Full-Scale Output Frequency
Rs 750.00
Quick Info :
Stackable design, easy to plug into the ARDUINO development board.
Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
Coupled with the XBee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.
Rs 750.00
Quick Info :
This infrared sensor trio detector and trio output Build-in TCRT5000 sensor
Number of channels : 3
Rs 750.00
Quick Info :
Power supply: 3-5v (Recommended 3.3v)
Communication mode: Standard IIC/SPI communication protocol
Chip built in AD 16bit converter, 16 bit data output
Gyro range: ±125 ±250 ±500 ±1000 ±2000 degrees /s
Rs 750.00
Quick Info :
Temperature range: -50 -110°C
Dimensions: 48.5 * 40mm
Temperature control mode: ON / OFF
Control accuracy: 0.1 °C
Output voltage: DC 12V
Rs 750.00
