-
Waterproof Cable Connector Pair 10A IP67 1.5mm2
Quick Info:
- Waterproof Rating : IP67
- Wire Gauge : 1.5mm²
- Rated Current : 10A (approx)
Price range: Rs 240.00 through Rs 740.00 -
1W RGB High Power LED 6-Pin Heat Sink
Quick Info:
- Total Power : 1W
- Pin Configuration : 6-Pin (RGB)
- Forward Current : 350mA per Channel
- Base Type : 20mm Aluminum Star PCB
Rs 240.00Rs 300.001W RGB High Power LED 6-Pin Heat Sink
Rs 240.00Rs 300.00 -
Rs 250.00
Rs 490.00Mini RS232 to TTL Level Converter Module
Rs 250.00Rs 490.00 -
FPV Pan/Tilt Camera Mount
Quick Info :
- Weight: 38g
- Size: 70x38x36mm
- Compatible Servos : Servo 9g or Servo MG90S
Rs 250.00FPV Pan/Tilt Camera Mount
Rs 250.00 -
SD Card Reader Module
Quick Info :
- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- This module can handle 2GB SD cards.
Rs 250.00Rs 350.00SD Card Reader Module
Rs 250.00Rs 350.00 -
NE555 Pulse Generator Module
Quick Info :
- The working voltage: 5 ~ 12V
- Output amplitude: 4.2V V-PP(5v input) to 11.4V V-PP(12V input).
- Maximum output current: >=15mA (5V IN), >=35mA (12V IN)
Rs 250.00Rs 290.00NE555 Pulse Generator Module
Rs 250.00Rs 290.00 -
15A 400W MOSFET Trigger Switch Drive Module
Quick Info :
- Operating Voltage: DC 5V – 36V;
- The trigger source: digital high-low (DC3.3V – 20V),
- Output capacity: DC 5V – 36V,
Rs 250.00Rs 390.0015A 400W MOSFET Trigger Switch Drive Module
Rs 250.00Rs 390.00 -
LM2596 DC to DC Step down (Buck) Adjustable Module
Quick Info :
- Input voltage 3.2V ~ 40V
- Output voltage 1.25V ~ 35V
- Output current 3A (max)
- Alternative : XL4015 Buck
Rs 250.00Rs 290.00LM2596 DC to DC Step down (Buck) Adjustable Module
Rs 250.00Rs 290.00 -
5V USB Output Charger Step-Down Power Module
Quick Info :
- Input voltage: DC 6-24V
- Output voltage: 5.1-5.2V
- Output current: 2A
Rs 250.00 -
5V 600MA USB Output charger step up Power Module
Quick Info:
- Input voltage: 0.9V – 5V;
- Output voltage: 5V;
- Output Amps : 600mA
Rs 250.00 -
Soil Hygrometer Humidity Detection Module
Quick Info :
- Operating voltage: 3.3V~5V.
- Adjustable sensitivity (shown in blue digital potentiometer adjustment)
- Dual output mode,analog output more accurate.
- A fixed bolt hole for easy installation.
- With power indicator (red) and digital switching output indicator (green).
Rs 250.00Rs 300.00Soil Hygrometer Humidity Detection Module
Rs 250.00Rs 300.00 -
DHT11 Humidity and Temperature Sensor
Quick Info :
- Working Voltage : 3 to 5V DC
- Humidity Range : 20-80% humidity; ±5% accuracy
- Temperature Range : -20°C to 50°C temperature; ±2°C accuracy
Rs 250.00Rs 390.00DHT11 Humidity and Temperature Sensor
Rs 250.00Rs 390.00 -
Multimeter Probes – Normal Quality
Quick info:
- Handle Size: 9.5 x 1cm (3.7″ x 0.4″) (L x D)
- Metal Probe Size: 1.6 x 0.2cm (0.6″ x 0.08″) (L x D)
- Total Cable Length: 50cm
- Rated Voltage: 750V
- Current: 7A
- Material: Plastic, Metal
- Color: Red, Black
Rs 250.00Rs 390.00Multimeter Probes – Normal Quality
Rs 250.00Rs 390.00 -
-
STM8 Development Board STM8S003F3P6
Quick Info
- On-board STM8S003F3P6 chip
- On-board SWIM connector for programming
- On-board reset switch
- Reserved external crystal oscillator soldering place
- AMS1117-3.3 voltage regulator for convering 5 V power supply to 3.3 V
- Mini USB connector for powering the board
- Board Size: 36.5 x 21.6 mm
Rs 250.00STM8 Development Board STM8S003F3P6
Rs 250.00 -
Infrared Speed Sensor Module
Quick Info :
- Working voltage: 3.3V~5V
- The output form: Digital switching outputs. (0 and 1)
- Pin Configuration : VCC, GND, Dout and Aout
Rs 250.00Infrared Speed Sensor Module
Rs 250.00 -
TP5100 Lithium Cell Charging Module
Quick Info :
- Model: TP5100
- Input Supply voltage (V): 5 ~ 18
- Programmable charge current: 0.1 ~ 2 A.
Rs 250.00TP5100 Lithium Cell Charging Module
Rs 250.00 -
Reed Sensor Module Magnetic Control Switch
Quick info:
- Operating Voltage: 3.3V to 5V DC
- Output format: Digital switching output ( 0 and 1 )
- LEDs indicating output and power
Rs 250.00
