Quick Info :
Operating Voltage: 5V
5 Push buttons.
Left, Right, Up, Down and Select buttons
Screen contrast adjustment
Arduino Reset button
Rs 595.00
Quick Info :
Connector Type: USB Type -B
PCB Size: 20 x 20 mm
Weight: 4g
Rs 100.00
Quick Info :
Simple 3 pin interface to control the resistance
Supply voltage: 3V-5V
Chip: X9C103S
PCB board size: 2.7 * 1.3CM
10K span potentiometer.
Rs 590.00
Quick Info :
Maximum output power: 3W*2(5V 4Ω)
Built with switch Potentiometer
Rs 320.00
Quick Info :
MT8870 Frequency decoder chip
Onboard 3.5mm input interface
5V Input
Designed to be compatible with standard 2.54mm sockets
Rs 490.00
Quick info:
3000-count display for precise measurements
AC current measurement up to 600A
AC/DC voltage measurement up to 600V
Resistance testing up to 3MΩ range
Capacitance measurement up to 1mF
Auto-identify diode and continuity testing
LIVE wire detection for enhanced safety
Rs 6,890.00Rs 7,200.00
Quick Info :
True TFT display with 262,144 vibrant colors
4-wire SPI interface – minimal pin usage
Works with 3.3V and 5V systems
Built-in microSD card slot for bitmap storage
Compatible with Arduino, Raspberry Pi, ESP32
Controllable LED backlight
Compact 34.5×58.0mm PCB size
Rs 1,490.00
Quick Info :
Input Voltage : AC 100-240V, 50/60Hz
Output Voltage : 5V DC
Output Current : 5A (Max)
Output Power : 25W
Efficiency : ≥85%
Ripple & Noise : ≤100mV
Rs 1,490.00
Quick Info :
Model : RS-380
Operating Voltage : 6V – 12V DC
Nominal Voltage : 12V DC
Shaft Diameter : 2.3 mm
Shaft Length : 6.4 mm
Motor Body Diameter : ~27.5 mm
Motor Length : ~37.6 mm
Rs 590.00
Quick Info :
Model : Computer Power Base 3 Pin
Color : Black
Connector Type : 3-Pin
Input Voltage : 100-240V AC, 50/60Hz
Max Current : 10A
Rs 60.00
Quick Info :
Supply Voltage : ±3V to ±18V
Input Bias Current : 5pA
Input Offset Voltage : 3mV
Slew Rate : 13V/µs
Gain Bandwidth Product : 3MHz
Common-Mode Rejection Ratio (CMRR) : 100dB
Rs 40.00
Quick Info :
IC Type : JFET-Input Operational Amplifier
Supply Voltage : ±3 V to ±18 V
Input Bias Current : 20 pA (typical)
Input Offset Voltage : 3 mV (max)
Slew Rate : 13 V/µs
Gain Band width Product :3 MHz
Rs 40.00
Quick Info :
LED Type : SMD 5050
Color : White
Length : 5m
Voltage : 12V
Beam Angle : 120°
Waterproof Rating : IP20 (Indoor)
Installation : Self-adhesive backing or clips for mounting
Rs 285.00
Quick Info :
Brand : AKKO
Material : Polyvinyl Chloride (PVC)
Adhesive Type : Rubber-based Pressure-Sensitive
Thickness : 0.13mm
Width : 18mm
Dielectric Strength : ≥ 600V/mil
Color Options : Black
Rs 125.00
Quick Info :
Material : Polyvinyl Chloride (PVC)
Adhesive Type : Rubber-based Pressure-Sensitive
Thickness : 0.18mm
Width : 15mm
Dielectric Strength : ≥ 600V/mil
Color Options : Black
Rs 80.00
Quick Info :
Speaker Type: Full-range
Impedance: 4Ω (Ohms)
Power Handling: 5W
Magnet Type: Ferrite or Neodymium
Size: 2 inches (Diameter)
Frequency Response: 150Hz – 20kHz
Rs 350.00
Quick Info :
Voltage: 6 Volts
Capacity: 4.5 Ampere-hours (Ah)
Battery Type: Lead-Acid
Dimensions: 70mm (Length) x 46mm (Width) x 106mm (Height)
Terminal Types: B/C/E
Design: Sealed, maintenance-free, and leak-proof
Rs 1,490.00
Quick Info :
Model Number: 23HS5628-6.35
Frame Size: 56.4 mm x 56.4 mm (NEMA 23 standard)
Shaft : “D” shaft 22mm(Length)
Ф6.35mm(Diameter)
Motor Length: 56 mm
Rs 3,990.00
