Alphatronic
-
GT2 20T Timing Pulley 6.35mm Bore
Quick Info :
- Teeth : 20T
- Bore : 6.35mm
- Outer Diameter: 16mm
- Belt Width : 6mm / 10mm
- Type : GT2 timing pulley
Price range: Rs 150.00 through Rs 200.00GT2 20T Timing Pulley 6.35mm Bore
Price range: Rs 150.00 through Rs 200.00 -
Micro SD TF Card Reader Mini Module 3.3V
Quick Info:
- Interface : SPI
- Operating Voltage : 3.3V
- Pins : 6 (GND, VCC, MISO, MOSI, SCK, CS)
- Compatible Cards : Micro SD / TF Card
- File System : FAT16 / FAT32
- Compatible Platforms : Arduino, ESP32, STM32, Raspberry Pi
Rs 150.00Rs 200.00Micro SD TF Card Reader Mini Module 3.3V
Rs 150.00Rs 200.00 -
KY-013 Analog NTC Temperature Sensor Module
Quick Info:
- Sensor Type : NTC Thermistor
- Interface : Analog (ADC)
- Operating Voltage : 3.3V – 5V DC
- Temperature Range : -55°C to 125°C
- Thermistor Resistance : 10KΩ at 25°C
- Pins : 3 (Signal, VCC, GND)
Rs 150.00Rs 160.00KY-013 Analog NTC Temperature Sensor Module
Rs 150.00Rs 160.00 -
KY-018 Photoresistor LDR Sensor Module
Quick Info:
- Sensor Type : LDR (Photoresistor)
- Interface : Analog (ADC)
- Operating Voltage : 3.3V – 5V DC
- Resistance (Dark) : 1MΩ (typical)
- Resistance (Bright) : 10KΩ (typical)
- Pins : 3 (Signal, VCC, GND)
Rs 150.00Rs 200.00KY-018 Photoresistor LDR Sensor Module
Rs 150.00Rs 200.00 -
KY-004 Key Switch Module
Quick Info:
- Operating Voltage : 3.3V – 5V DC
- Output Type : Digital (HIGH / LOW)
- Interface : 3-Pin (Signal, VCC, GND)
- Idle Output : HIGH
- Pressed Output : LOW
- Onboard Resistor : Yes
- Compatible With : Arduino, Raspberry Pi, ESP32
Rs 150.00Rs 200.00KY-004 Key Switch Module
Rs 150.00Rs 200.00 -
KY-031 Knock Sensor Module
Quick Info:
- Operating Voltage : 3.3V – 5V DC
- Output Type : Digital (HIGH / LOW)
- Sensor Type : Spring-Based Knock Sensor
- Idle Output : HIGH
- Knock Detected Output : LOW
- Onboard Resistor : Yes
- Compatible With : Arduino, Raspberry Pi, ESP32
Rs 150.00Rs 200.00KY-031 Knock Sensor Module
Rs 150.00Rs 200.00 -
KY-016 RGB LED Module 5mm 3 Color
Quick Info:
- LED Type : 5mm Common Cathode RGB
- Operating Voltage : 3.3V – 5V
- Current per Channel : 20mA
- Interface Pins : 4 (R, G, B, GND)
- Compatibility : Arduino, ESP32, Raspberry Pi
- PCB Size : 18.5mm × 15mm
Rs 150.00Rs 200.00KY-016 RGB LED Module 5mm 3 Color
Rs 150.00Rs 200.00 -
KY-029 Dual Color LED Module
Quick Info:
- LED Type : 5mm Dual Color (Red & Green)
- Operating Voltage : 3.3V – 5V
- Current per Channel : 20mA
- Interface Pins : 3 (Red, Green, GND)
- Compatibility : Arduino, ESP32, Raspberry Pi
- PCB Size : 18.5mm × 15mm
Rs 150.00Rs 200.00KY-029 Dual Color LED Module
Rs 150.00Rs 200.00 -
KY-034 Automatic Flashing RGB LED Module
Quick Info:
- LED Type : 5mm Auto-Flashing RGB (Built-in IC)
- Operating Voltage : 3.3V – 5V
- Forward Current : 20mA
- Interface Pins : 3 (Signal, VCC, GND)
- Color Mode : Automatic cycling, no code needed
- Compatibility : Arduino, ESP32, Raspberry Pi
- PCB Size : 18.5mm × 15mm
Rs 150.00Rs 200.00KY-034 Automatic Flashing RGB LED Module
Rs 150.00Rs 200.00 -
Velcro Self-Adhesive Cable Organizer 50x50mm
Quick Info:
- Type : Hook-and-Loop Velcro Tape
- Size : 50mm x 50mm
- Mounting : Self-Adhesive Backing
- Reusability : Reusable (Hook-and-Loop)
Rs 150.00Rs 200.00Velcro Self-Adhesive Cable Organizer 50x50mm
Rs 150.00Rs 200.00 -
Reversing Car Bulb P21W BA15S 12V 21W
Quick Info:
- Bulb Type : P21W single filament
- Base : BA15S (bayonet)
- Voltage / Wattage : 12V / 21W
- Luminous Flux : 460 lm
- Length / Diameter : 52.5mm / 26.5mm
- Cross References : 382, 1156, 7506
Rs 150.00Rs 180.00Reversing Car Bulb P21W BA15S 12V 21W
Rs 150.00Rs 180.00 -
DC Female Jack Pigtail 5.5mm x 2.1mm 20cm
Quick Info:
- Connector Type : DC Female Barrel Jack
- Outer Diameter : 5.5mm
- Inner Diameter : 2.1mm
- Wire Length : 20cm
- Polarity : Center Positive
Rs 150.00Rs 175.00DC Female Jack Pigtail 5.5mm x 2.1mm 20cm
Rs 150.00Rs 175.00 -
LM3915 3dB Steps Bar Graph Display Driver
Quick Info :
- Display Type : 10-segment LED/LCD/VFD driver
- Package Type : DIP-18, SOIC-18
- Logarithmic Scale : 3dB per step
- Operating Voltage : 3V to 25V
- LED Drive Current : Adjustable
- Modes : Bar or dot display selectable
Rs 160.00 -
LM3914 Display Driver IC
Quick Info :
- Operating Voltage : 3V to 18V
- Current per LED : 2mA to 30mA
- Reference Voltage : 1.2V to 12V
- Typical Standby Current : 1.5mA
- Package Types : DIP-18, SOIC-18
- Operating Temperature Range : -40°C to +85°C
Rs 160.00LM3914 Display Driver IC
Rs 160.00 -
-
IRFZ34N N-channel Power MOSFET
Quick Info :
- : N Channel
- : 55V
- : 29A
- : 0.04ohm
Rs 170.00IRFZ34N N-channel Power MOSFET
Rs 170.00 - : N Channel
-
74390 Dual 4-bit Decade Counter
Quick Info :
- Series: CD74HC390
- Function: Counter
- Product Category: Counter ICs
- Counter Type: Decade
Rs 175.0074390 Dual 4-bit Decade Counter
Rs 175.00 -
IRF520 MOSFET Driver Module
Quick Info :
- Voltage: 3.3V, 5V
- Output load voltage :0-24V
- Output load current: <5A (1A need to add more heat sink)
Rs 180.00Rs 250.00IRF520 MOSFET Driver Module
Rs 180.00Rs 250.00
















