Quick Info :
Compatible: ESP-01, ESP-07, ESP-12, ESP32
Interface: USB to Serial (CH340/CP2102)
Power: 3.3V regulated output
Features: Auto-reset, GPIO breakout, boot mode switches
Programming: Arduino IDE, ESP-IDF, MicroPython
Use: ESP development, testing, firmware flashing, IoT projects
Rs 1,350.00Rs 1,450.00
Quick Info :
ESP32 SoC with Wi-Fi and BLE connectivity
OV2640 2M pixel camera with connector included
Micro SD card connector
Reset button
Rs 2,290.00Rs 2,690.00
Quick Info :
Chip: ESP32-WROOM-32 (Dual-core 240MHz)
Pins: 30 GPIO
Flash: 4MB / SRAM: 520KB
Connectivity: WiFi 802.11n + Bluetooth 4.2
USB: Type-C with CP2102
Power: Deep sleep ~10μA
Rs 1,350.00Rs 1,450.00
Quick Info :
Chip: ESP32-WROOM-32
Processor: Dual-core 240 MHz
Connectivity: WiFi + Bluetooth 4.2
GPIO: 30 pins
USB: CP2102 with Micro USB
Flash: 4 MB
Voltage: 3.3V operating, 5V input
Rs 1,350.00Rs 1,450.00
Quick Info :
Chip: ESP32-WROOM-32
Processor: Dual-core 240 MHz
Connectivity: WiFi + Bluetooth 4.2
Pins: 38 pins total
USB: CP2102 with Micro USB
Flash: 4 MB
Voltage: 3.3V operating, 5V input
Rs 1,400.00Rs 1,500.00
Quick Info :
Compatibility: 30-pin & 38-pin ESP32 boards
Terminals: Screw terminal blocks (3.81mm pitch)
Power: No onboard regulation (uses ESP32 power)
Wire Support: 22-28 AWG
Size: ~75mm x 55mm
Assembly: Plug-and-play design
Mounting: 4 mounting holes included
Rs 750.00Rs 850.00
Quick info:
N16R8: 16 MB Flash and 8 MB PSRAM.
Dual-Core Xtensa® LX7 Processor – Runs at up to 240 MHz for high-performance computing.
Wi-Fi 4 & Bluetooth 5 (LE) – Supports 2.4 GHz Wi-Fi and Bluetooth Low Energy (BLE) for wireless connectivity.
Dual USB-C Ports:
One for power and USB-to-UART bridge communication for easy programming.
One for native USB functionality, supporting USB OTG, device emulation, or USB mass storage applications.
Rs 1,850.00Rs 2,290.00
Quick Info :
Type: 44-pin expansion breakout board
Compatible: ESP32-S3 development boards
Terminals: Screw terminal blocks (1→2 expansion)
Spacing: 25.4mm (44-pin)
Size: 80mm x 58mm
No Soldering Required
Rs 850.00Rs 950.00
Quick info:
Dual-Core Xtensa® LX7 Processor – Runs at up to 240 MHz for high-performance computing.
Wi-Fi 4 & Bluetooth 5 (LE) – Supports 2.4 GHz Wi-Fi and Bluetooth Low Energy (BLE) for wireless connectivity.
USB OTG (Full-Speed) – Built-in USB 1.1 OTG for flashing, communication, and JTAG debugging.
Rs 2,290.00Rs 2,490.00
Quick Info :
13 programmable GPIOs
Power
– 5v
– 3.3v
Digital interfaces:
– 1 × SPI
– 1 × UART
– 1 × I2C
– 1 × I2S
– 1 x LED PWM controller
Analog interfaces:
– 2 × 12-bit SAR ADCs, up to 6 channels
Rs 950.00
Quick info:
Chipset: CH340
Connectivity: Micro-USB
IO Port: 9
Power Supply(V): 5
Rs 390.00
Quick Info :
Two low-power Xtensa® 32-bit LX6 microprocessors
802.11 b/g/n (802.11n up to 150Mbps) Wi-Fi protocol
BLUETOOTH® v4.2 BR/EDR and BLE
SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, and IR module interfaces
Hall sensor
2.7V to 3.6V operating voltage supply
Rs 1,280.00
Quick Info :
Core: ESP32-D0WD (Xtensa Dual-Core 32 -bit LX6 Microprocessor)
Clock Frequency: Adjustable from 80 MHz to 240 MHz
Wireless Connectivity: Wi-Fi $802.11 b/g/n and Bluetooth v4.2 BR/EDR & BLE
Flash Memory: 4 MB (Integrated SPI Flash)
SRAM: 520 KB
Antenna Type: External Antenna via U.FL Connector
Peripherals: 32 GPIOs, ADC, DAC, UART, SPI, I²C, I²S, Motor PWM, Touch Sensor
Supply Voltage: 3.0 V – 3.6 V DC
Rs 1,450.00Rs 1,650.00
Quick Info :
802.11 b/g/n
Operating Voltage: 3.3V
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Rs 590.00
Quick Info :
Teeth: 40
Bore: 5 mm
Material: Brass
Filament: 1.75 mm
Application: 3D Printer Extruder
Rs 180.00Rs 280.00
Quick Info :
Model – YS 60
Rated Power – 50W to 60 W
Rated Voltage – 220V
Capacitor – 1.2uf , 1.5uf , 1.8uf , 400V – 450V
Rated Frequency – 50Hz
RPM – 1200/r min
Rs 2,590.00
Quick Info :
Operating Voltage : 3.3V ~ 5.5V
Infrared Wavelength Detection : 760nm ~ 1100nm
Sensor Detection Angle : 60°
Rs 180.00Rs 280.00
Quick Info :
Type: Rigid Flange Coupling
Bore: 4mm (both sides)
Material: Steel
Features: Zero backlash, set screw locking
Mounting: Flange with screw holes
Use: Motor shafts, robotics, CNC, 3D printers, encoders
Rs 350.00Rs 400.00