Quick Info :
CH340G replace the Atmega 16U2
Microcontroller: ATmega2560
Analog Input Pins: 16
Digital I/O Pins: 54 (of which 14 provide PWM output)
Rs 4,890.00
Quick Info :
Working Voltage : DC 5V~24V
Flow Rate Range : 1~30L/min
Load Capacity: ≤10mA (DC 5V)\
Water Inlet/ Outlet Diameter : 0.5 inch
Rs 1,590.00
Quick Info :
Max. Operating Voltage: 28 V
Min. Operating Voltage: 4.75 V
Max. Current Per Phase: 2 A
Alternatives for TMC2209 : DRV8825, A4988
Rs 1,490.00Rs 3,250.00
Quick Info :
Operating Voltage: 12V DC
Module Dimensions: 5cm x 2.7cm x 2cm
Sensor: Photosensitive resistance module
Rs 650.00
Quick Info :
Dimensions: 2.95″ x 0.5″ x 0.125″ (without header pins installed)
Operating voltage: 3.3-5.0 V
Supply current: 100 mA
Output format: 8 digital I/O-compatible signals that can be read as a timed high pulse
Rs 1,290.00
Quick Info :
Power requirements : VCC – 5V±0.1
DO output : TTL digital 0 and 1 (0.1 and 5V)
AO output : 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
Detection Gas: Carbon Monoxide
Rs 590.00
Quick Info :
On-board TTP224 capacitive touch 4 key IC
On-board 4 road level indicator.
Working voltage: 2 V to 5.5 V DC
PCB board size: 35(mm) x29 (mm).
Rs 320.00
Quick Info:
Input Voltage: 5Vdc
Input Voltage (limits): 5Vdc
Output Voltage: 5Vdc
Output Current (maximum): 600ma
Rs 3,290.00Rs 3,500.00
Quick Info :
Operating voltage:5V (supplied from the Arduino Board)
Ethernet Controller: W5500 with internal 32K buffer
Connection speed: 10/100Mb
Connection with Arduino on SPI port
Rs 4,390.00
Quick Info :
A single module can drive a total of 8 * 8 dot matrix overcast
The module voltage: 5V
Module Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height)
Rs 1,650.00
Quick Info:
Working voltage: 6 to 18V
Dual channel 15W+15W
on-board dial potentiometer
Rs 590.00
Quick Info :
Measures AC voltage up to 250V
Built-in ZMPT101B voltage transformer (1000:1000 ratio)
High galvanic isolation up to 4000V for safety
Wide supply voltage: 5V to 30V DC
Compatible with Arduino, ESP8266, Raspberry Pi
Adjustable analog output for versatile applications
Rs 540.00
Quick Info :
Transistor Type : NPN
Package Type : TO-92
Collector-Emitter Voltage : 50V
Collector-Base Voltage : 60V
Emitter-Base Voltage : 5V
Rs 15.00
Quick Info :
Transistor Type : PNP
Collector-Emitter Voltage : 80V
Collector-Base Voltage : 100V
Emitter-Base Voltage : 5V
Continuous Collector Current : 15A
Pulsed Collector Current : 30A
DC Current Gain : 50 – 320
Rs 20.00
Quick Info :
Type: Internal TV Speaker
Size : 60mm X 125mm
Impedance: 4 Ohms
Power Output: 3 Watts (RMS)
Frequency Response: 100 Hz – 15 kHz
Rs 490.00
Quick info :
Product model: ZK-MT21
Bluetooth-compatible version: 5.0
Input sensitivity: 500mV
Input method: AUX+ Bluetooth-compatible
Number of channels: 2.1 channels
Power amplifier chip: Domestic power amplifier chip
Adapter power supply: above DC12-24V/5A (24V battery pack is not allowed)
Adapted speakers: 20-100W, 4-8Q
Output power: left and right channels <50W; subwoofer <100W
Rs 4,500.00Rs 4,890.00
