Alphatronic
-
LM2596 DC to DC Step Down Adjustable Module with LED Display
Quick Info :
- IC: LM2596 Buck Converter
- Input: 4.5-40V DC
- Output: 1.25-35V DC (adjustable)
- Current: 3A max (2A recommended)
- Display: LED voltmeter (built-in)
- Use: Power supplies, battery chargers, voltage regulation
Rs 550.00Rs 750.00LM2596 DC to DC Step Down Adjustable Module with LED Display
Rs 550.00Rs 750.00 -
MAX7219 8 X 8 LED Dot Matrix Module
Quick Info :
- Display Size: 1.3 inches
- Matrix: 8 × 8 (64 LEDs)
- Driver IC: MAX7219
- Operating Voltage: 5 V
- A single module can drive 8 x 8 common cathodes
Rs 550.00Rs 600.00MAX7219 8 X 8 LED Dot Matrix Module
Rs 550.00Rs 600.00 -
PAM8403 3W Audio Amplifier
Quick Info:
- Supply Voltage: 5VDC
- 3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 130.00PAM8403 3W Audio Amplifier
Rs 130.00 -
Computer Power Base 3 Pin Male IEC
Quick Info :
- Model : Computer Power Base 3 Pin
- Color : Black
- Connector Type : 3-Pin
- Input Voltage : 100-240V AC, 50/60Hz
- Max Current : 10A
Rs 60.00Computer Power Base 3 Pin Male IEC
Rs 60.00 -
IRF630 N channel Power MOSFET
Specifications :
- Transistor type: N-channel
- Maximum applied voltage from drain-to-source (VDS): 200 V
- Maximum Drain current (continuous) ID: 9 A
- Maximum Drain Current (Pulse): 36 A
- Maximum Power dissipation: 74 W
Rs 120.00IRF630 N channel Power MOSFET
Rs 120.00 -
TMC2209 Ultra Silent Stepper Motor Driver
Quick Info :
- Operating Voltage : 4.75V to 28V
- Continuous Current : 2A RMS
- Peak Current : 2.8A
- Microstepping : Up to 1/256
- Interface : STEP/DIR & UART
Rs 1,450.00Rs 3,250.00TMC2209 Ultra Silent Stepper Motor Driver
Rs 1,450.00Rs 3,250.00 -
TIP122 NPN Epitaxial Darlington Transistor
Quick Info :
- Transistor Type : NPN – Darlington
- Current – Collector (Ic) (Max) : 5 A
- Voltage – Collector Emitter Breakdown (Max) : 100 V
Rs 40.00 -
Micro SD Card Reader Module SPI
Quick Info:
- Interface : SPI (MISO, MOSI, SCK, CS)
- Operating Voltage : 4.5V to 5.5V DC
- Logic Level : 3.3V and 5V
- Supported Cards : Micro SD (up to 2GB), Micro SDHC (up to 32GB)
- Header : 6-pin
Rs 350.00Micro SD Card Reader Module SPI
Rs 350.00 -
3-Channel CCPM Servo & ESC Tester
Quick Info:
- Channels : 3
- Operating Voltage : 4.8V to 6V DC
- Output Signal : 1.5ms ± 0.5ms
- Test Modes : Manual, Neutral, Automatic
- Connectable Devices : Up to 3 servos or 3 ESCs
Rs 350.00Rs 450.003-Channel CCPM Servo & ESC Tester
Rs 350.00Rs 450.00 -
-
5V Relay Module Optocoupler High/Low Trigger
Quick Info:
- Operating Voltage : 5V DC
- Trigger Mode : High/Low Level
- Max Load : AC 250V/10A, DC 30V/10A
- Isolation : Optocoupler
Price range: Rs 280.00 through Rs 1,520.00 -
M12 Metal Push Button Momentary 12mm
Quick Info :
- Size: 12mm
- Type: Momentary
- Material: Stainless Steel
- Waterproof: Yes
- Voltage: 12V – 24V DC
Rs 180.00Rs 200.00M12 Metal Push Button Momentary 12mm
Rs 180.00Rs 200.00 -
JST MX 2.0mm 2 Pin Male Female Cable Pair
Quick Info :
- Connector Type: JST MX
- Pitch: 2.0 mm
- Number of Pins: 2
- Gender: Male and Female Pair
Rs 80.00Rs 150.00JST MX 2.0mm 2 Pin Male Female Cable Pair
Rs 80.00Rs 150.00 -
PCM5102 DAC I2S Interface Decoder
Quick Info :
- Chip: PCM5102
- Resolution: Up to 32-bit/384kHz
- Interface: I2S
- Power: 3.3 V – 5 V DC
Rs 850.00Rs 1,050.00PCM5102 DAC I2S Interface Decoder
Rs 850.00Rs 1,050.00 -
Ultraviolet 395nm 400nm UV LED Diode 5mm
Quick Info :
- Wavelength: 395 nm – 400 nm UV
- Size: 5 mm
- Voltage: 3.0 V – 3.4 V
- Current: 20 mA
- Viewing Angle: 20° – 30°
Rs 20.00Rs 30.00Ultraviolet 395nm 400nm UV LED Diode 5mm
Rs 20.00Rs 30.00 -
Kamoer 12V DC Mini Peristaltic Pump NKP-DC-S06B
Quick Info :
- Type: Mini Peristaltic Pump
- Voltage: 12V DC
- Flow Rate: 37 ml/min
- Tubing Material: Silicone
- Tubing Size: 2mm x 4mm
- Features: Low noise, maintenance-free
Rs 2,500.00Rs 2,900.00Kamoer 12V DC Mini Peristaltic Pump NKP-DC-S06B
Rs 2,500.00Rs 2,900.00 -
40 Pin 2.54mm Single Row Round Female Pin Header
Specifications :
- Connector type : female
- Number of pins :40
- Spatial orientation : straight
- Contacts pitch : 2.54mm
- Electrical mounting : THT
Rs 50.00 -
5V Step-Up Power Module Board 134N3P
Quick Info :
- BAT Discharging Stop Voltage: 2.9V.
- Discharging Efficiency:85%(input 3.7V output 5V/1A).
- Charging and discharging indication.
- Internally installed charging and discharging power MOS.
Rs 180.00Rs 200.005V Step-Up Power Module Board 134N3P
Rs 180.00Rs 200.00


















