Skip to content
Quick Info :
Connector Type : USB Type-C Female
Mount Type : Panel Mount (Threaded with Nut)
Cable Length : Approx. 20 cm
Wire Type : Pre-soldered Red & Black Power Wires
Protection : Waterproof Dust Cap Included
Rs 320.00Rs 500.00
Quick Info :
Microcontroller: ESP32
Connectivity: WiFi + Bluetooth
GPIO Count: 38 Pins
USB Type: Type-C
Operating Voltage: 3.3 V
Rs 1,750.00Rs 1,800.00
Quick Info :
Range: 0-100V DC
Display: 0.28″ Red LED
Accuracy: ±1%
Wiring: Three-wire (separate power & signal)
Application: Battery/Solar/Automotive monitoring
Rs 280.00Rs 320.00
Quick Info :
WIDE SUPPLY RANGE: 2.0V to 5.5V
PROGRAMMABLE DATA RATE: 8SPS to 860SPS
Rs 650.00Rs 950.00
Quick Info :
Transistor Polarity : NPN
Collector Emitter Voltage V(br)ceo : 60V
DC Collector Current : 5A
Power Dissipation Pd : 65W
Rs 60.00
Quick Info:
Bluetooth Version : V2.0+EDR
Roles : Master / Slave
Operating Voltage : 3.3V to 5V
Logic Level : 3.3V
Default Baud Rate : 9600 bps
Range : Up to 10m
Rs 1,100.00Rs 1,350.00
Quick Info :
Compatible Sensor : HC-SR04 Ultrasonic Module
Material : Acrylic
Mounting Hole Diameter : 3.8mm
Mounting Hardware : Not included (M3 screws recommended)
Rs 120.00Rs 130.00
Quick Info:
Connector Type : USB 3.1 Type-C, 24-Pin Male Plug
Kit Components : Plug + PCB, Strain-Relief Clip, Shell Housing
Installation Type : Solder Terminal
Orientation : Reversible Plug Shape
Rs 80.00Rs 100.00
Quick Info:
Type : SPST (Single Pole Single Throw)
Pins : 2
Rated Voltage : 250V AC / 125V AC
Rated Current : 3A @ 250V AC / 6A @ 125V AC
Mounting : Snap-in Panel Mount
Panel Cutout : 19mm x 13mm (approx.)
Operating Temp : -25°C to +85°C
Rs 40.00Rs 50.00
Quick Info :
Type: Reflective IR Sensor
Package: 4-Pin Through-hole
Components: IR LED + Phototransistor
Optimal Range: 2.5mm
Wavelength: 950nm
Use: Line tracking, encoders, proximity
Rs 45.00Rs 50.00
Quick Info :
Size: 15 mm x 17 mm
Shaft Hole: 6 mm D-shaft
Color: Red and Green
Material: ABS plastic
Rs 20.00Rs 25.00
Quick Info :
Item Name: Panel Mounted Fuse Holder
Fit for: 5 x 20mm / 0.2 Inch x 0.79 Inch Fuses;
Rated: AC 125V 15A; AC 250V 10A
Rs 50.00Rs 55.00
Quick Info :
Chip: ESP32 dual-core (240MHz)
Memory: 4MB Flash, 520KB SRAM
Camera: OV2640 2MP (up to 1600×1200)
Storage: MicroSD card slot
Connectivity: WiFi 802.11n + Bluetooth 4.2
Frame Rate: Up to 60fps at VGA
Programming: Arduino IDE, ESP-IDF (requires USB-TTL adapter)
Power: 5V DC
Note: External programmer required
Rs 2,250.00Rs 2,690.00
Quick Info :
Adjustable sensitivity (via blue digital potentiometer adjustment)
Operating voltage 3.3V-5V
Output Type : Digital switching outputs (0 and 1) -D0
Using LM393 comparator chip, stable
Rs 130.00
Quick Info :
Arduino and Raspberry Pi compatible
16-key membrane switch pad has 8 pin female header on end of flat cable
White sticker on back can be peeled off for adhesive mounting
Rs 200.00Rs 290.00
Quick Info:
Type : Momentary, Normally Open
Base Size : 6mm x 6mm
Height : 10mm
Pins : 4-pin THT
Rs 15.00
Quick Info:
Model : KCD11
Switch Type : SPST (Single Pole Single Throw)
Rated Voltage : AC 250V
Rated Current : 3A
Number of Pins : 2
Mounting Type : Panel Mount (Snap-in)
Rs 30.00Rs 40.00