Quick Info :
10x PCB Stand Screw M3
20x M3 Screw Nut
Rs 100.00Rs 800.00
Quick Info :
Diameter: 10mm
Height: 2mm
Rs 65.00
Quick Info :
Compatible Motors: Nema 17/23/34(42/57/86 Stepper Motor)
9V-42V DC power supply;
H-bridge bipolar constant-phase flow-driven;
maximum output current of 4.0A eight optional
Rs 1,650.00
Quick Info :
Operating voltage range : DC 4.5-20V
Sensing distance : 3 meters
Delay Time : The default 8S + -30%
Rs 400.00
Quick Info :
EC11 potentiometer; Handle Length 20MM
Shaft Movement Direction : 360 Degree
Shaft Diameter : 6mm/ 0.24″
Shaft Length : 7mm / 0.3″
Rs 30.00
Quick Info:
RP2040 Microcontroller chip
Dual-core Arm Cortex-M0+ processor
Clock speed running up to 133 MHz
264KB on-chip SRAM
2MB on-board QSPI Flash
Programmable using MicroPython or C language.
Rs 2,490.00
Specifications :
Connector type : female
Number of pins :40
Spatial orientation : straight
Contacts pitch : 2.54mm
Electrical mounting : THT
Rs 90.00
Quick Info :
Four 7-Segment LED Displays with 0.36″ high red digits
Built-in TM1637 LED Driver
2-wire serial interface for easy hookup to uC
3.3 and 5V compatible
Rs 390.00
Quick Info :
Works with standard (dual 5/3.3V) and 3.3V-only
Supports HID devices, such as keyboards, mice, joysticks, etc.
Compatible with Mass storage devices, such as USB sticks, memory card readers and external hard drives
Rs 1,990.00
Quick Info:
GY-53 infrared ranging module (VL53L0X + STM32)
Module type: GY-53
Use chip: VL53L0X + STM32
Power supply: 3-5v (low dropout voltage regulator)
Range: 2 meters (dark, long distance mode)
Rs 2,950.00
Quick Info :
Working Voltage : 3 – 5.5V.
The maximum Current : 49mA 5V.
Range : 20cm to 800 cm
Rs 1,550.00
Quick Info :
Supply Voltage: 2.6V to 5.5V
Average active ranging sensor current: 19mA
Interface: I2C
Dimension: 13mm x 11mm
Rs 1,250.00
Quick Info :
Diameter: 12mm
Height: 2mm
Rs 85.00
Quick Info :
Temperature Range : -55°C to +85°C
Wire Interface : 1-wire interface
3.3 and 5V compatible
Rs 350.00
Quick Info :
The current sensor chip : ACS712
Current measuring : up to 30A
5V power supply, on-board power indicator
Rs 550.00
Quick Info :
12-key membrane switch pad has 7 pin female header on end of flat cable
White sticker on back can be peeled off for adhesive mounting
Rs 250.00
Quick Info :
Option 1 : DB9 Connector
Option 2 : DB9 and DB25 Connectors
Rs 850.00Rs 990.00
Quick Info:
Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
Power via USB or External Source
Onboard 5V Regulator
6 I/O Pins
Rs 450.00
Quick Info :
Liquid pH Value Detection Sensor
Heating voltage: 5±0.2V
Working current: 5-10mA
Electrode Probe for Liquid pH Value Detection Sensor Module
PH range: 0-14 PH
Temperature range: 0-60℃
Rs 5,990.00Rs 7,100.00
Quick Info :
240*320 pixels
Suitable for an Uno (Atmega328P) or Mega (Atmega2560) based Arduinos (other chips are not supported)
Dimensions: 72.5 mm x 53 mm
Driver: ILI9320 or ILI9341 (or compatible with one of two)
Rs 2,250.00
Quick Info :
Input: 1-5VDC
Output voltage: 5V
Output Current: 500mA
Rs 390.00
