Quick Info :
IC: MP1584EN
Input: 4.5V – 28V DC
Output: 0.8V – 20V DC (Adjustable)
Current: 3A max, 1.8A continuous
Efficiency: 96%
Size: 22mm x 17mm x 4.3mm
Frequency: 1.5MHz
Rs 260.00Rs 300.00
Quick Info :
Type : Strain Gauge Load Cell
Material : Aluminum Alloy
Capacity : 50kg (Maximum Load)
Shape : Rectangular
Rated Output : ~1.0mV/V to 2.0mV/V
Excitation Voltage : 5V to 12V DC (Recommended 10V)
Zero Balance : ±0.1mV/V
Rs 260.00
Quick Info :
Transistor Type : NPN Power Transistor
Collector-Emitter Voltage : 60 V
Collector-Base Voltage : 100 V
Emitter-Base Voltage : 5 V
Continuous Collector Current : 15 A
Peak Collector Current : 30 A
Power Dissipation : 115 W
Rs 255.00
Quick Info :
Length: 20cm
Connectors: SMA Female to IPEX4/MHF4
Compatible With: SIM800L, SIM900A, ESP32U
Impedance: 50 Ohm
Rs 250.00Rs 300.00
Quick Info :
Operating Voltage (Control): 5 V DC
Channels: 1 Channel
Isolation: Optocoupler (Opto-Isolated)
Max Switching Voltage (AC): 250 V AC @ 10 A
Rs 250.00Rs 350.00
Quick Info :
Frequency: Quad-Band (850 /900 / 1800 /1900 MHz)
Length: 50 mm
Connector: SMA Plug (Right-Angle)
Impedance: 50 Ohms
Gain: approx 2 dBi
Rs 250.00Rs 290.00
Quick Info :
Type: Wi-Fi Antenna
Frequency: 2.4GHz & 5.8GHz
Gain: 2dBi
Connector: RP-SMA Male
Length: 5cm
Rs 250.00Rs 290.00
Quick Info :
Type: Motor Mounting Bracket
Material: Aluminium Alloy
Compatibility: 37GB(GA) DC Motors
Dimensions: 47x40x43mm
Rs 250.00Rs 290.00
Quick info :
The fuse holder works with any 2-30 amp blade fuse.
The structure of the fuse holder provides extra protection against water and dust.
Rs 250.00
Quick Info :
Model: TP5100
Input Supply voltage (V): 5 ~ 18
Programmable charge current: 0.1 ~ 2 A.
Rs 250.00
Quick Info :
Available Diameter : 1mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 28.0mm
Price Per Meter
Rs 18.00Rs 250.00
Quick Info :
Working voltage: 3.3V~5V
The output form: Digital switching outputs. (0 and 1)
Pin Configuration : VCC, GND, Dout and Aout
Rs 250.00
Quick info:
Handle Size: 9.5 x 1cm (3.7″ x 0.4″) (L x D)
Metal Probe Size: 1.6 x 0.2cm (0.6″ x 0.08″) (L x D)
Total Cable Length: 50cm
Rated Voltage: 750V
Current: 7A
Material: Plastic, Metal
Color: Red, Black
Rs 250.00Rs 390.00
Quick Info:
Input voltage: 0.9V – 5V;
Output voltage: 5V;
Output Amps : 600mA
Rs 250.00
Quick Info :
Input voltage: DC 6-24V
Output voltage: 5.1-5.2V
Output current: 2A
Rs 250.00
Quick Info :
Voltage: 3.3V, 5V
Output load voltage :0-24V
Output load current: <5A (1A need to add more heat sink)
Rs 250.00
Quick Info :
It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator
Rs 250.00
Quick Info :
Operating Voltage: 5V
Backlight and Contrast is adjusted by potentiometer
Compatible for 16×2 , 16×4 and 20×4 LCD
Rs 250.00Rs 390.00
Quick Info :
Pin Pitch: 5.08 mm
Pole Range: 2 -Pin to 12 -Pin
Orientation: Right Angle
Rating: 15 A / 300 V
Function: Quick Disconnect Wire-to-Board
Rs 40.00Rs 245.00
Quick Info :
Operating Voltage: 3.3V DC to 5V DC
Output Current : 15mA
PCB Size : 32 x 14mm
Rs 240.00
Quick Info :
MAX485 chip-based for reliable RS485 communication
Compatible with 3.3V and 5V power supplies
Built-in 120-ohm termination resistor (jumper selectable)
RX/TX LED indicators for signal monitoring
Rs 230.00
Quick Info :
IC Type: Self-Oscillating Half-Bridge Driver
Operating Voltage Range (Vcc): 10V to 15.6V
Maximum Supply Voltage (Vcc max): 20V
Output Driver Voltage: 600V (High-Side & Low-Side)
Output Peak Current: ±500mA
Adjustable Oscillator Frequency: Up to 150kHz
Rs 230.00
Quick info :
Rating: 600V 15A
Positions: 5, 8, 10, and 12
Rs 120.00Rs 230.00
Quick Info :
No. of Channels : 2 Channels
Driver Configuration : Half Bridge
Power Switch Type : MOSFET
No. of Pins : 8 Pins
Rs 230.00
Quick Info :
Operating voltage: 3.3V~5V.
Adjustable sensitivity (shown in blue digital potentiometer adjustment)
Dual output mode,analog output more accurate.
A fixed bolt hole for easy installation.
With power indicator (red) and digital switching output indicator (green).
Rs 230.00
Quick Info
Working voltage : 5V
Output format : Digital switching output (0 and 1), and analog voltage output AO
Potentiometer adjust the sensitivity
Uses a wide voltage LM393 comparator
Rs 230.00
Quick Info :
Input Voltage: 4.5V – 28V
Output Voltage: 0.8V – 20V
Output Voltage Adjustment: On-board potentiometer
Output Current: 1.8A (typical), 3.0A (max).
Rs 230.00
Quick Info :
High Voltage Outputs: 50V
Inputs Compatible with Popular Logic Types (5V TTL – Arduino Compatible)
Relay Driver Applications
Rs 230.00Rs 390.00
Quick Info :
Transistor Polarity : PNPCollector Emitter Voltage V(br)ceo : 60VDC Collector Current : 15APower Dissipation Pd : 115W
Rs 225.00
Quick Info :
Size : 30x20x7 mmImpedance : 4 Ohms Power : 3 W MaxProfile : Ultra-SlimUse : Portable Audio/Small Devices
Rs 220.00Rs 250.00
Quick Info :
Transistor Type: NPN
Collector-Emitter Voltage (Vce): 80V
Collector-Base Voltage (Vcb): 80V
Emitter-Base Voltage (Veb): 5V
Collector Current (Ic): 15A (maximum)
Power Dissipation (Pd): 100W
Rs 220.00
Rs 220.00 – Rs 250.00
