Quick Info :
Working Voltage : 3 to 5V DC
Humidity Range : 20-80% humidity; ±5% accuracy
Temperature Range : -20°C to 50°C temperature; ±2°C accuracy
Rs 390.00
Quick Info :
Operating voltage : 3.3 V
Operating current : 4~5 mA
Signal to noise ratio : 54 dB
Rs 200.00
Quick Info :
Operating voltage: 3.3V~5V.
Adjustable sensitivity (shown in blue digital potentiometer adjustment)
Dual output mode,analog output more accurate.
A fixed bolt hole for easy installation.
With power indicator (red) and digital switching output indicator (green).
Rs 250.00
Quick Info
Working voltage : 5V
Output format : Digital switching output (0 and 1), and analog voltage output AO
Potentiometer adjust the sensitivity
Uses a wide voltage LM393 comparator
Rs 290.00
Quick Info :
Voltage: 5V
Power Consumption : 65mA
Sensing range : < 120 °, within 7 meters
Rs 320.00Rs 390.00
Specifications :
Input Voltage: 5V
Current Draw: 20mA (Max)
Range: 2cm – 400 cm
Rs 320.00Rs 430.00
Quick Info :
Power Requirements: 2.7 to 6.5 VDC
Communication Interface: I²C (up to 400 kHz)
Operating temperature: -22 to +185 °F to +85 °C)
Dimensions: 0.73 x .65 in ( 1.8 x 1.7 cm)
Rs 850.00
Quick Info :
Adjustable sensitivity (via blue digital potentiometer adjustment)
Operating voltage 3.3V-5V
Output Type : Digital switching outputs (0 and 1) -D0
Using LM393 comparator chip, stable
Rs 300.00
Specifications :
Operating voltage : 4.5 V to 5.5 V
Output type : Analog Voltage
Distance measuring range : 10 cm to 80 cm (4″ to 32″)
Rs 1,990.00
Quick Info :
Operating Voltage: 5V
Current Consumption: 30-60mA
Frequency: 38kHz
Wavelength: 940nm
Rs 220.00
Quick Info :
Chip type: VS1838B
Operating Voltage: 3.3V to 5V
Current Consumption: 1.5mA peak
Receiving angle: 90 °
Reception distance: 17m
Rs 220.00
Quick Info :
Working voltage of 3.3V to 5V
Output form: digital switch output (0 and 1)
Using infrared reflection sensors TCRT5000
Test reflection distance: 1mm to 25mm
Rs 190.00Rs 270.00
Quick Info :
Dimensions: 2.95″ x 0.5″ x 0.125″ (without header pins installed)
Operating voltage: 3.3-5.0 V
Supply current: 100 mA
Output format: 8 digital I/O-compatible signals that can be read as a timed high pulse
Rs 1,290.00
Quick Info :
Power Supply Voltage : 5V
Size : 27 * 17mm
Communication Type : serial port communication (TTL level)
Rs 650.00
Quick Info :
Working Voltage : 3.3v to 5v
Detectable Distance : 2 ~ 30cm,
Detection angle : 35 °
Comparator chip: LM393
Rs 180.00
Quick Info :
Power requirements : VCC – 5V±0.1
DO output : TTL digital 0 and 1 (0.1 and 5V)
AO output : 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
Detection Gas : Natural gas/Methane
Detection Concentration : 200-10000ppm (Natural gas / Methane)
Rs 590.00
Quick Info :
Power requirements: 5 VDC
Current Consumption: 150mA
DO output: TTL digital 0 and 1 ( 0.1 and 5V)
AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
Detecting Concentration: 0.05-10mg/L Alcohol
Rs 590.00
Quick Info :
Operating Voltage is +5V
Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
Analog output voltage: 0V to 5V
Digital Output Voltage: 0V or 5V (TTL Logic)
Rs 490.00
Quick Info :
Operating Voltage: 2.5V to 5.0V Power consumption: 150mA Detect/Measure: NH3, Nox, CO2, Alcohol, Benzene, Smoke Typical operating Voltage: 5V
Rs 490.00
Quick Info :
Senses Bus Voltages : 0 V to 36 V
High-Side or Low-Side Sensing
Reports Current, Voltage, and Power
Operates from 2.7-V to 5.5-V Power Supply
Rs 900.00Rs 1,650.00
Quick Info :
Type : Sensor Brick
Interface : 3PIN
Power Supply : 5V
Board Size : 30 × 24 × 1.6mm
Rs 950.00
Quick Info :
The current sensor chip : ACS712
Current measuring : up to 5A
5V power supply, on-board power indicator
Rs 550.00
Quick Info :
The current sensor chip : ACS712
Current measuring : up to 20A
5V power supply, on-board power indicator
Rs 550.00
Quick Info :
On-board TTP226 IC
On-board 4 road level indicator.
Working voltage: 2 V to 5.5 V DC
PCB board size: 47.4 (mm) x 46 (mm)
Rs 495.00
Quick Info :
On-board TTP224 capacitive touch 4 key IC
On-board 4 road level indicator.
Working voltage: 2 V to 5.5 V DC
PCB board size: 35(mm) x29 (mm).
Rs 320.00
Quick Info :
Optical sensor: IR and red LED combined with a photodetector
Measures absorbance of pulsing blood
I2C interface plus INT pin
3.3V power supply complete pulse oximeter and heart rate sensor solution, simplifies design, integrated LEDs, photo sensor, and high-performance analog front
Rs 550.00
Specifications :
Supply voltage: 3.6 – 6.0VDC
Operating current: 120mA max
Peak current: 150mA max
Fingerprint imaging time: < 1.0 seconds
Storage capacity: 162 templates
Rs 3,500.00
Quick Info :
Acceleration, Gyroscope, and Magnetometer
9 DOF module
Build-in ultra-low noise linear LDO voltage regulator.
Built-in onboard filters, which reduce noise from the motor and other high current electronics.
Rs 1,590.00
Quick Info :
Model: GY-521
Chip: MPU-6050
Power supply: 3.3V
Communication mode: standard IIC communication protocol
Rs 650.00Rs 790.00
Quick Info :
3V-6V DC Supply Voltage
On-board LDO Voltage regulator
Built-in Voltage level convertor (MOSFET based)
It can be interface with 3.3V or 5V Microcontroller.
Rs 690.00
Quick Info:
Input voltage: 0.9V – 5V;
Output voltage: 5V;
Output Amps : 600mA
Rs 250.00
Quick Info:
Input Voltage: 5Vdc
Input Voltage (limits): 5Vdc
Output Voltage: 5Vdc
Output Current (maximum): 600ma
Rs 3,290.00Rs 3,500.00
Quick Info :
Input voltage range：4-35VDC
Input current：7A
Output voltage range：3.5-35VDC
Output current: 6A
Output power: 100W
Rs 1,750.00
