Temperature/Humidity
Temperature and humidity sensors: DHT11, DHT22, DS18B20 waterproof probes, BME280, BME680, SHT30, AHT20, NTC thermistors and flame sensors.
-
DHT22 Temperature and Humidity Sensor
Quick Info :
- Operating Voltage : 3.5V to 5.5V
- Temperature Range : -40°C to 80°C
- Humidity Range : 0% to 100%
Rs 450.00Rs 570.00DHT22 Temperature and Humidity Sensor
Rs 450.00Rs 570.00 -
BME280 Temperature Humidity Pressure Sensor Module
Quick Info :
- Sensor: BME280
- Measures: Temperature, Humidity, Pressure
- Accuracy: ±1°C, ±3%RH, ±1hPa
- Interface: I2C / SPI
- Voltage: 3.3V – 5V
- Use: Weather stations, IoT, altitude sensing, environmental monitoring
Rs 1,880.00Rs 2,150.00BME280 Temperature Humidity Pressure Sensor Module
Rs 1,880.00Rs 2,150.00 -
DHT11 Humidity and Temperature Sensor
Quick Info :
- Working Voltage : 3 to 5V DC
- Humidity Range : 20-80% humidity; ±5% accuracy
- Temperature Range : -20°C to 50°C temperature; ±2°C accuracy
Rs 250.00Rs 390.00DHT11 Humidity and Temperature Sensor
Rs 250.00Rs 390.00 -
SHT30 Waterproof Temp & Humidity Sensor Probe
Quick Info:
- Sensor IC : Sensirion SHT30
- Interface : I2C
- Supply Voltage : 3.3V – 5V DC
- Temperature Range : -40°C to +125°C
- Temperature Accuracy : ±0.2°C (typical)
- Humidity Range : 0% – 100% RH
- Humidity Accuracy : ±2% RH (typical)
- Waterproof Rating : IP67 (probe section)
- Cable Length : 1 metre (approx.)
Rs 1,450.00Rs 1,550.00SHT30 Waterproof Temp & Humidity Sensor Probe
Rs 1,450.00Rs 1,550.00 -
Flame Sensor Module 4 Pin
Quick Info :
- Type: Flame Detection Module
- Voltage: 3.3–5V
- Outputs: Analog + Digital
- Pins: 4-Pin Interface
- Use: Fire detection, safety projects
Rs 180.00Rs 280.00Flame Sensor Module 4 Pin
Rs 180.00Rs 280.00 -
BME680 Temperature, Humidity, Pressure and Gas Sensor
Quick Info :
- Interface: I²C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)
- Compatible with 3.3V and 5V Systems
- Gas, humidity, pressure and temperature.
Rs 3,290.00Rs 3,390.00BME680 Temperature, Humidity, Pressure and Gas Sensor
Rs 3,290.00Rs 3,390.00 -
AHT20+BMP280 Temperature Humidity Pressure
Quick Info :
- Measuring Range (humidity): 0% to 100% RH
- Temperature Range: -40°C to +85°C
- Air pressure range : 300-1100hPa (equi. to +9000 to -500m above sea level)
- Temperature range: -40 to +85 °C
Rs 490.00 -
STC 3028 Dual Temp & Humidity Controller
Quick Info:
- Model : STC-3028
- Input Voltage : DC 12V / AC 230V
- Temperature Range : -50°C to +110°C
- Humidity Range : 0% – 100% RH
- Accuracy : ±1°C / ±0.1% RH
- Relay Output : 2 × independent, 10A / 240V AC each
- Control Modes : Heat / Cool / Humidify / Dehumidify
- Display : Dual LED (Red temp / Blue humidity)
- Sensor Cable : 1 metre integrated
- Power Consumption : < 3W
- Dimensions : 75 × 34.5 × 85mm
- Panel Cutout Size : 71 × 29mm
Price range: Rs 2,520.00 through Rs 2,650.00STC 3028 Dual Temp & Humidity Controller
Price range: Rs 2,520.00 through Rs 2,650.00 -
Human Body Temperature Sensor MAX30205
Quick Info :
- Type: Digital Body Temperature Sensor
- Accuracy: ±0.1°C (body temp)
- Voltage: 2.7V – 3.3V
- Interface: I2C Communication
- Resolution: 16-bit
Rs 4,350.00Human Body Temperature Sensor MAX30205
Rs 4,350.00 -
Thermal Fuse Switch
Quick info:
- Temperature Cutoff: 102-145
- Rated Current: 2A
- Rated Voltage: 250V~
Rs 30.00Thermal Fuse Switch
Rs 30.00 -
AHT10 High Precision Digital Temperature and Humidity Sensor
Quick Info :
- Interface Type: I2C.
- Working voltage: 3.3~5.0V DC.
- Temperature: -40ºC ~ 85ºC.
- Humidity: 0 ~ 100%.
Rs 490.00 -
10K Ohm 103 NTC Thermistor
Quick Info :
- Resistance (at 25°C): 10KΩ (±1% to ±5% tolerance)
- Beta Value (B25/50): 3950K – 4500K (varies by model)
- Operating Voltage: 3V – 5V (typically used with microcontrollers)
- Power Dissipation: ≤100mW
Rs 50.0010K Ohm 103 NTC Thermistor
Rs 50.00 -
GY-MCU90640 MLX90640 32×24 Thermal Sensor
Quick Info:
- Model : MLX90640BAB / GY-MCU90640
- Sensor Array : 32 x 24 Pixels (768 Points)
- Temperature Range : -40°C to +300°C
- Accuracy : ±1.5°C (Typical)
- Field of View : 55° x 35°
- Interface : I2C
- Operating Voltage : 3.3V
- Refresh Rate : 0.5Hz to 64Hz
Rs 11,750.00Rs 12,500.00GY-MCU90640 MLX90640 32×24 Thermal Sensor
Rs 11,750.00Rs 12,500.00 -
LM35DZ Temperature Sensor IC
Quick Info :
- Operating Voltage : 4V to 30V DC
- Output Voltage : 0 mV + (10 mV/°C × Temperature)
- Temperature Range : -55°C to +150°C
- Accuracy : ±0.5°C at 25°C
- Linear Scale Factor : 10 mV/°C
- Response Time : Typically less than 1 second
Rs 200.00LM35DZ Temperature Sensor IC
Rs 200.00 -
Ring Lug 10K 3950 NTC Thermistor
Quick Info:
- Thermistor Type : NTC
- Resistance at 25°C : 10KΩ
- B-Value : 3950K
- Cable length: 1m
- Terminal Type : Ring Lug
- Operating Temperature : -40°C – 125°C
- Tolerance : ±1%
Rs 320.00Rs 350.00Ring Lug 10K 3950 NTC Thermistor
Rs 320.00Rs 350.00 -
Mini LCD TPM10 Digital Temperature Meter
Quick Info :
- Type: Digital Thermometer
- Temperature Range: -50°C to +110°C
- Display: LCD
- Probe: External Wired Sensor
- Application: Refrigerators, Aquariums, etc.
Rs 450.00Rs 550.00Mini LCD TPM10 Digital Temperature Meter
Rs 450.00Rs 550.00 -
DHT21 AM2301 Temperature & Humidity Sensor
Quick Info :
- Model : AM2301
- Temperature Range : -40°C to +80°C
- Humidity Range : 0% to 99% RH
- Supply Voltage : 3.3V – 5V DC
- Accuracy (Temperature) : ±0.5°C
- Accuracy (Humidity) : ±3% RH
- Resolution (Temperature) : 0.1°C
- Resolution (Humidity) : 0.1% RH
Rs 1,490.00DHT21 AM2301 Temperature & Humidity Sensor
Rs 1,490.00 -
Analog Output K-Type Thermocouple Amplifier – AD8495 Breakout
Quick info :
- Model: AD8495
- Sensing Accuracy Range: ± 1°C around room temperature, ± 2°C for −25°C to +400°C, beyond that range see the AN-1087 app note
- Supply Voltage: 3-18VDC
- Thermocouple Type: K-Type only
Rs 3,790.00
Sensors for weather stations, incubators, greenhouses and room monitors: DHT11 and DHT22, DS18B20 1-Wire sensors and stainless waterproof probes, BME280 and BMP280 combos with pressure, BME680 with gas, SHT30 waterproof probes, AHT10 and AHT20, NTC thermistors, the MAX30205 body temperature sensor and flame sensor modules.
Choosing a temperature sensor
The DHT11 is cheap but coarse. The DHT22, AHT20 and SHT30 measure humidity more accurately. For liquids, soil or anything outdoors, the waterproof DS18B20 probe is the usual choice, and several can share one pin. The BME280 adds air pressure on I2C. NTC thermistors need an analog input and a resistor, but cope with higher temperatures.