Quick Info :
Chip type: VS1838B
Operating Voltage: 3.3V to 5V
Current Consumption: 1.5mA peak
Receiving angle: 90 °
Reception distance: 17m
Rs 220.00
Quick Info :
Adjustable sensitivity (via blue digital potentiometer adjustment)
Operating voltage 3.3V-5V
Output Type : Digital switching outputs (0 and 1) -D0
Using LM393 comparator chip, stable
Rs 300.00
Quick info:
Normally Open
Voltage:
Switching (VDC-MAX.): 200
Breakdown (VDC-MIN): 250
Arc-Quench (VDC-MIN): 200
Current:
Switching (AMPERES-MAX.): 0.5
Carry (AMPERES-MAX.): 1.2
Rs 90.00
Quick Info :
Optical sensor: IR and red LED combined with a photodetector
Measures absorbance of pulsing blood
I2C interface plus INT pin
3.3V power supply complete pulse oximeter and heart rate sensor solution, simplifies design, integrated LEDs, photo sensor, and high-performance analog front
Rs 550.00
Quick Info :
LED Peak Wavelength: 660nm/880nm
LED Supply Voltage: 3.3~5V
Interface: I2C Interface
Operating Temperature Range: -40°C to +85°C
Rs 590.00
Quick Info :
Test Voltage range: DC3 – 25V (on 5V) or DC3 – 16.5V (on 3.3V)
Monitors Both Charge and Discharge
Complete High-Side Current Sensing
Current Sensing up to 3A
Rs 1,950.00
Quick info:
Supply voltage: 3 to 5.5V
Module current: 50mA
Module interface: Serial (SO, SCK, CS), 16-bit SPI compatible
Thermocouple temperature range: 0 to 450°C
Module sensor temperature range: 0 to 1024°C
Rs 1,290.00
Quick Info :
LCD Size: 35.7*16.8mm
Operation Temperature: -15°c to 70°c
Humidity measurement range: 10%~99%
Rs 600.00
Quick Info :
Model: GY-521
Chip: MPU-6050
Power supply: 3.3V
Communication mode: standard IIC communication protocol
Rs 650.00Rs 790.00
Quick Info :
Acceleration, Gyroscope, and Magnetometer
9 DOF module
Build-in ultra-low noise linear LDO voltage regulator.
Built-in onboard filters, which reduce noise from the motor and other high current electronics.
Rs 1,590.00
Quick Info :
Operating Voltage: 2.5V to 5.0V
Power consumption: 150mA
Detect/Measure: NH3, Nox, CO2, Alcohol, Benzene, Smoke
Typical operating Voltage: 5V
Rs 490.00
Quick Info :
Operating Voltage is +5V
Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
Analog output voltage: 0V to 5V
Digital Output Voltage: 0V or 5V (TTL Logic)
Rs 490.00
Quick Info :
Power requirements: 5 VDC
Current Consumption: 150mA
DO output: TTL digital 0 and 1 ( 0.1 and 5V)
AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
Detecting Concentration: 0.05-10mg/L Alcohol
Rs 590.00
Quick Info :
Power requirements : VCC – 5V±0.1
DO output : TTL digital 0 and 1 (0.1 and 5V)
AO output : 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
Detection Gas : Natural gas/Methane
Detection Concentration : 200-10000ppm (Natural gas / Methane)
Rs 590.00
Quick Info :
Operating Voltage: 3.3V DC to 5V DC
Output Current : 15mA
PCB Size : 32 x 14mm
Rs 240.00
Quick Info :
Measure range : 0.00-14.00 pH
Resolution : 0.01 pH
Accuracy : +/- 0.01 pH
Rs 2,790.00
Quick Info :
Biometric Pulse Rate or Heart Rate detecting sensor
Plug and Play type sensor
Operating Voltage: +5V or +3.3V
Current Consumption: 4mA
Rs 690.00
Quick Info
Working voltage : 5V
Output format : Digital switching output (0 and 1), and analog voltage output AO
Potentiometer adjust the sensitivity
Uses a wide voltage LM393 comparator
Rs 290.00
Quick info:
Operating Voltage: 3.3V to 5V DC
Output format: Digital switching output ( 0 and 1 )
LEDs indicating output and power
Rs 250.00
Quick Info :
Dimensions: 2.95″ x 0.5″ x 0.125″ (without header pins installed)
Operating voltage: 3.3-5.0 V
Supply current: 100 mA
Output format: 8 digital I/O-compatible signals that can be read as a timed high pulse
Rs 1,290.00
Quick Info :
Operating voltage: 3.3V~5V.
Adjustable sensitivity (shown in blue digital potentiometer adjustment)
Dual output mode,analog output more accurate.
A fixed bolt hole for easy installation.
With power indicator (red) and digital switching output indicator (green).
Rs 250.00
Quick Info :
Operating voltage : 3.3 V
Operating current : 4~5 mA
Signal to noise ratio : 54 dB
Rs 200.00
Quick Info :
Working voltage of 3.3V to 5V
Output form: digital switch output (0 and 1)
Using infrared reflection sensors TCRT5000
Test reflection distance: 1mm to 25mm
Rs 190.00Rs 270.00
Quick info :
Model: TCS3472
Communication: I2C
Dimensions: 20.44mm / 0.8″ x 20.28mm / 0.79″
Rs 1,100.00
Quick Info :
Conductivity : 0 – 9990 us/cm
TDS : 0 – 5000ppm
Temperature :
Degrees Celsius : 0.1 – 80,
Fahrenheit : 32.0 – 176
Accuracy : 2%
Rs 2,590.00
Quick Info :
Vcc Range Typical 3.0 – 5.5V
Collector Light Current
20 lux 10uA (typical)
100 lux 50uA (typical)
Spectral Detection
Detection Range 440nm-800nm
Rs 590.00
Quick info:
Temperature Cutoff: 102-145
Rated Current: 2A
Rated Voltage: 250V~
Rs 30.00
Quick info :
Model: TTP223.
Dimensions: 15mm x 11mm.
Input Voltage: 2 Volt – 5.5 Volts DC.
Rs 60.00
Specifications:
Working Voltage: DC5V
Working Current: 30mA(MAX)
Response Time: <500mS
Insulation Resistance: 100M¦¸(Min)
Rs 4,350.00
Quick Info :
Working voltage : 3.3V ~ 5V
Output type: Digital switching output (0 and 1)
Wide voltage : comparator LM393
Rs 220.00
Quick Info :
Voltage sensing range – 5v to 25v
Voltage Analog Resolution: 0.00489V
Rs 150.00
Quick Info :
Temperature range: -50 -110°C
Dimensions: 48.5 * 40mm
Temperature control mode: ON / OFF
Control accuracy: 0.1 °C
Output voltage: DC 12V
Rs 750.00
Quick Info :
Temperature measurement and programming range: -50°C …110°C
Measurement accuracy: 0.1°C in the range from -9.9°C to 99.9°C; or 1.0°C outside this range
Control accuracy: 0.1°C 0.1°C in the range -9.9°C to 99.9°C; or 1.0°C outside this range
Hysteresis accuracy: 0.1°C
Reading update time: 0.5 seconds
Supply voltage, V: 110-220 AC
Rs 890.00
Quick Info :
Working Voltage : DC 3-5V
Working Current : <20mA
Operating temperature: 10~30 Celsius
Sensor Type : Analog
Rs 130.00
Quick Info :
Working Voltage : DC 5V~24V
Flow Rate Range : 1~30L/min
Load Capacity: ≤10mA (DC 5V)\
Water Inlet/ Outlet Diameter : 0.5 inch
Rs 1,590.00