-
LED 5mm Bulb Common Anode
Specification:
- 5mm Round Standard Directivity
- Color : Red, Blue, Green, White, Yellow
- UV Resistant : Eproxy
- Forward Current (IF): 30mA
- Forward Voltage (VF): 1.8V to 2.4V
Rs 5.00LED 5mm Bulb Common Anode
Rs 5.00 -
Plastic Gear for Coreless Drone Motor 9 Teeth
Quick Info :
- Teeth: 9 teeth
- Material: Engineering plastic
- Motor Type: 7mm coreless
- Bore: 1.0mm
- Weight: <0.5g
Rs 50.00Rs 100.00Plastic Gear for Coreless Drone Motor 9 Teeth
Rs 50.00Rs 100.00 -
SSOP 16PIN/SOP 16PIN to DIP Adapter PCB Module
Quick Info :
- Input: SSOP-16 / SOP-16 SMD packages
- Output: DIP-16 (2.54mm pitch)
- SSOP Pitch: 0.635mm
- SOP Pitch: 1.27mm
- PCB: FR4, 1.6mm thickness
- Compatible: Breadboards, DIP sockets
- Use: SMD to through-hole conversion
Rs 50.00Rs 80.00SSOP 16PIN/SOP 16PIN to DIP Adapter PCB Module
Rs 50.00Rs 80.00 -
SOIC 8 SOP8 to DIP8 Converter Module
Quick Info:
- Compatible Package : SOIC-8 / SOP8
- Output Format : DIP-8
- SMD Pad Pitch : 1.27mm
- DIP Pin Pitch : 2.54mm
- PCB Material : FR4
- PCB Dimensions : 19mm x 14mm (approx.)
- Surface Finish : HASL
Rs 50.00Rs 80.00SOIC 8 SOP8 to DIP8 Converter Module
Rs 50.00Rs 80.00 -
Micro USB to DIP Converter Module
Quick Info :
- USB Type : Micro USB
- Header : 2.54mm
- Material : Plastic
- Size(L*W) : Approx. 26.06 x 22.93mm
Rs 60.00Micro USB to DIP Converter Module
Rs 60.00 -
RFID 13.56Mhz Card Empty
Quick Info :
- Credit Card Size, 13.56MHz, 1K Bytes Memory, ISO14443A, Read/Write protect by password, easy to program.
- Compatible with RC522 and PN532 readers.
- White card, card number not printed, No magnetic stripe, no holes. Each card individually packaged.
- Discounts applicable for more than 100 Card
Rs 60.00Rs 95.00RFID 13.56Mhz Card Empty
Rs 60.00Rs 95.00 -
TTP223 Red Capacitive Touch Sensor Module
Quick info :
- Model: TTP223.
- Dimensions: 15mm x 11mm.
- Input Voltage: 2 Volt – 5.5 Volts DC.
Rs 60.00 -
LED Strip IP68
Quick Info :
- Voltage : 12V DC
- Thickness : 3mm
- Length: 64mm
- Power Consumption : Low Power
- Waterproof Rating : IP65 (Water-Resistant)
- Package only contains 1 strip
Rs 60.00LED Strip IP68
Rs 60.00 -
N20 DC Geared Motor Mounting Bracket Kit
Quick Info :
- Motor Type: SPG10 / N20 Gearmotors
- Material: Protective Plastic
- Included: Bracket, Screws, and Nuts
- Feature: Easy Nut Capture Tabs
- Use: Miniature Robotics
Rs 80.00Rs 100.00N20 DC Geared Motor Mounting Bracket Kit
Rs 80.00Rs 100.00 -
Logic Level Converter Bi-Directional Module 5V to 3.3V
Quick Info :
- 4 channels can convert up to 4 logic signals
- Can convert between 1.8V, 2.8V, 3.3V and 5V logic circuits
- Bi-directional so can work with bi-directional buses such as I2C
- Utilizes N-Ch MOSFET transistors for level translation
Rs 100.00Rs 150.00Logic Level Converter Bi-Directional Module 5V to 3.3V
Rs 100.00Rs 150.00 -
USB Type B to DIP Converter Module
Quick Info :
- Connector Type : USB Type B Female Socket
- Breakout Pins : VBUS, D+, D-, GND
- Pin Pitch : 2.54mm
- Mounting Style : DIP / Through-Hole
Rs 100.00USB Type B to DIP Converter Module
Rs 100.00 -
DC Power Adapter Board
Quick Info :
- Module Size: 2.8cm * 1.3cm
- Applicable connector: 5.5 * 2.1mm
- Power output interface: 2 channel VCC, 2 channel GND
- Net Weight: 3.2g
Rs 100.00DC Power Adapter Board
Rs 100.00 -
RGB SMD LED Board Module 5050
Quick Info :
- uses the 5050 full-color LED
- Operating voltage: 5V
- by adjusting the three primary colors can be mixed PWM get different colors
Rs 100.00RGB SMD LED Board Module 5050
Rs 100.00 -
65mm Plastic Wheel with Rubber Tyre for TT Motor
Quick Info :
- Compatible Motor : TT DC Gearbox Motor
- Outer Diameter : 65mm
- Tyre Width : ~27mm
- Shaft Hole : 5.3mm dia × 10mm depth
- Hub Joint : Pentagonal (15mm)
- Tyre Material : Rubber
- Rim Material : High-strength plastic
- Applications : Smart car, line follower, obstacle avoidance robot
Rs 100.00Rs 140.0065mm Plastic Wheel with Rubber Tyre for TT Motor
Rs 100.00Rs 140.00 -
USB 2.0 Female to DIP Converter Module
Quick Info :
- Operating Voltage : 5V
- Pin pitch : 2.54mm
- Operating Current : 500mA (MAX)
- Total Size : 25 x 17 x 10mm/1 x 0.68 x 0.4in(L*W*H)
Rs 100.00USB 2.0 Female to DIP Converter Module
Rs 100.00 -
Mini USB Female to DIP 5-Pin Adapter Board
Quick Info:
- Connector Type : Mini USB (5-pin, Female)
- Output Format : DIP, 2.54mm Pin Pitch
- Pin Configuration : VBUS, D+, D-, ID, GND
- Board Dimensions : Approx. 1.5cm x 1.3cm x 0.4cm
Rs 100.00Rs 150.00Mini USB Female to DIP 5-Pin Adapter Board
Rs 100.00Rs 150.00 -
USB Male Head to DIP 4 Pin
Quick Info :
- Dimensions : 31mm X 15mm X 5mm / 1.22 X 0.59 X 0.19 inch
Rs 100.00USB Male Head to DIP 4 Pin
Rs 100.00 -
TT Motor Bracket Aluminum Fastener
Quick Info :
- Material: Aluminum bracket
- Fastener Material: Stainless steel
- Compatible Motor Type: TT DC Gear Motor
Rs 100.00Rs 150.00TT Motor Bracket Aluminum Fastener
Rs 100.00Rs 150.00 -
KY-006 Passive Buzzer Module
Quick Info:
- Buzzer Type : Passive (tone controlled via code)
- Trigger Type : High Level
- Operating Voltage : 3.3V – 5V
- Operating Current : <25mA
- Frequency Range : 1.5kHz – 2.5kHz
- Interface Pins : 3 (Signal, VCC, GND)
- Compatibility : Arduino, ESP32, Raspberry Pi
- PCB Size : 18.5mm × 15mm
Rs 100.00Rs 150.00KY-006 Passive Buzzer Module
Rs 100.00Rs 150.00 -
HC-SR04 Ultrasonic Sensor Acrylic Bracket
Quick Info :
- Compatible Sensor : HC-SR04 Ultrasonic Module
- Material : Acrylic
- Mounting Hole Diameter : 3.8mm
- Mounting Hardware : Not included (M3 screws recommended)
Rs 120.00Rs 130.00HC-SR04 Ultrasonic Sensor Acrylic Bracket
Rs 120.00Rs 130.00 -
N20 Motor Rubber Small Wheel 34mm
Quick Info :
- Type: Mini Robot Wheel
- Diameter: 34mm
- Tire Width: 6.5mm
- Compatibility: N20 Motors
Rs 120.00Rs 150.00N20 Motor Rubber Small Wheel 34mm
Rs 120.00Rs 150.00 -
USB Type C to DIP Adapter PCB Module
Quick Info :
- Connector : USB Type-C
- Output Type : DIP 2.54 mm
- Use Case : Breadboard & PCB Prototyping
- Material : FR-4 PCB
Rs 120.00Rs 250.00USB Type C to DIP Adapter PCB Module
Rs 120.00Rs 250.00 -
Swivel Caster Wheels for Robot Car 1 Inch
Quick Info :
- Size: 1 inch (21mm) diameter
- Material: Nylon + Steel frame
- Rotation: 360° full swivel
- Load Capacity: Up to 10kg
- Bearing: Dual roller bearing
- Mounting: M4 holes (30×23mm spacing)
Rs 120.00Rs 180.00Swivel Caster Wheels for Robot Car 1 Inch
Rs 120.00Rs 180.00 -
RC Airplane Control Horn 16×17mm Plastic 3-Hole 1.6mm
Quick Info :
- Size: 16mm × 17mm
- Holes: 3 × 1.6mm diameter
- Material: Rigid nylon plastic
- Color: White
- Mount: Screw or adhesive
- Compatible: 1.0-1.6mm push rods
- Use: Aileron/elevator/rudder horns
- Aircraft: Universal fixed-wing RC
Rs 120.00Rs 150.00RC Airplane Control Horn 16×17mm Plastic 3-Hole 1.6mm
Rs 120.00Rs 150.00 -
RC Airplane Control Horn 19x17mm 4-Hole 1.4mm
Quick Info :
- Size: 19mm × 17mm
- Holes: 4 × 1.4mm diameter
- Material: Rigid nylon plastic
- Color: White
- Mount: Screw or adhesive
- Compatible: 0.8-1.4mm push rods
- Use: Aileron/elevator/rudder horns
- Aircraft: Universal fixed-wing RC
Rs 120.00Rs 150.00RC Airplane Control Horn 19x17mm 4-Hole 1.4mm
Rs 120.00Rs 150.00 -
LED Traffic Light Module 5V
Quick Info:
- Module Type : LED Traffic Light Module
- Operating Voltage : 5V DC
- LED Colors : Red, Yellow, Green
- Application : STEM Education, Arduino Projects
Rs 120.00Rs 150.00LED Traffic Light Module 5V
Rs 120.00Rs 150.00 -
PAM8403 3W Audio Amplifier
Quick Info:
- Supply Voltage: 5VDC
- 3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 130.00PAM8403 3W Audio Amplifier
Rs 130.00 -
GSM PCB Trace Antenna
Quick Info :
- Low Freq. range – 820-960mHz
- High Freq. range – 1710-1990mHz
- Cable – RF1.13
- Connector – I-PEX
Rs 150.00GSM PCB Trace Antenna
Rs 150.00 -
Micro SD TF Card Reader Mini Module 3.3V
Quick Info:
- Interface : SPI
- Operating Voltage : 3.3V
- Pins : 6 (GND, VCC, MISO, MOSI, SCK, CS)
- Compatible Cards : Micro SD / TF Card
- File System : FAT16 / FAT32
- Compatible Platforms : Arduino, ESP32, STM32, Raspberry Pi
Rs 150.00Rs 200.00Micro SD TF Card Reader Mini Module 3.3V
Rs 150.00Rs 200.00 -
KY-004 Key Switch Module
Quick Info:
- Operating Voltage : 3.3V – 5V DC
- Output Type : Digital (HIGH / LOW)
- Interface : 3-Pin (Signal, VCC, GND)
- Idle Output : HIGH
- Pressed Output : LOW
- Onboard Resistor : Yes
- Compatible With : Arduino, Raspberry Pi, ESP32
Rs 150.00Rs 200.00KY-004 Key Switch Module
Rs 150.00Rs 200.00 -
KY-016 RGB LED Module 5mm 3 Color
Quick Info:
- LED Type : 5mm Common Cathode RGB
- Operating Voltage : 3.3V – 5V
- Current per Channel : 20mA
- Interface Pins : 4 (R, G, B, GND)
- Compatibility : Arduino, ESP32, Raspberry Pi
- PCB Size : 18.5mm × 15mm
Rs 150.00Rs 200.00KY-016 RGB LED Module 5mm 3 Color
Rs 150.00Rs 200.00 -
KY-029 Dual Color LED Module
Quick Info:
- LED Type : 5mm Dual Color (Red & Green)
- Operating Voltage : 3.3V – 5V
- Current per Channel : 20mA
- Interface Pins : 3 (Red, Green, GND)
- Compatibility : Arduino, ESP32, Raspberry Pi
- PCB Size : 18.5mm × 15mm
Rs 150.00Rs 200.00KY-029 Dual Color LED Module
Rs 150.00Rs 200.00 -
KY-034 Automatic Flashing RGB LED Module
Quick Info:
- LED Type : 5mm Auto-Flashing RGB (Built-in IC)
- Operating Voltage : 3.3V – 5V
- Forward Current : 20mA
- Interface Pins : 3 (Signal, VCC, GND)
- Color Mode : Automatic cycling, no code needed
- Compatibility : Arduino, ESP32, Raspberry Pi
- PCB Size : 18.5mm × 15mm
Rs 150.00Rs 200.00KY-034 Automatic Flashing RGB LED Module
Rs 150.00Rs 200.00 -
IRF520 MOSFET Driver Module
Quick Info :
- Voltage: 3.3V, 5V
- Output load voltage :0-24V
- Output load current: <5A (1A need to add more heat sink)
Rs 180.00Rs 250.00IRF520 MOSFET Driver Module
Rs 180.00Rs 250.00
