Skip to content
Quick Info:
Chip : ESP32-D0WDQ6
Wireless Technologies: Bluetooth, Wi-Fi
ADC Resolution: 12 bit
Interface Type: CAN, I2C, I2S, SDIO, SPI, UART
Maximum Clock Frequency: 240 MHz
Number of ADC Channels: 18 Channel
Number of I/Os: 34 I/O
Rs 2,690.00
Quick Info :
Chip: ESP32 dual-core (240MHz)
Memory: 4MB Flash, 520KB SRAM
Camera: OV2640 2MP (up to 1600×1200)
Storage: MicroSD card slot
Connectivity: WiFi 802.11n + Bluetooth 4.2
Frame Rate: Up to 60fps at VGA
Programming: Arduino IDE, ESP-IDF (requires USB-TTL adapter)
Power: 5V DC
Note: External programmer required
Rs 2,250.00Rs 2,690.00
Quick Info :
Microcontroller: ESP32
Connectivity: WiFi + Bluetooth
GPIO Count: 38 Pins
USB Type: Type-C
Operating Voltage: 3.3 V
Rs 1,750.00Rs 1,800.00
Quick Info :
Chip: ESP32-WROOM-32
Processor: Dual-core 240 MHz
Connectivity: WiFi + Bluetooth 4.2
Pins: 38 pins total
USB: CP2102 with Micro USB
Flash: 4 MB
Voltage: 3.3V operating, 5V input
Rs 1,450.00Rs 1,500.00
Quick Info :
Core: ESP32-D0WD (Xtensa Dual-Core 32 -bit LX6 Microprocessor)
Clock Frequency: Adjustable from 80 MHz to 240 MHz
Wireless Connectivity: Wi-Fi $802.11 b/g/n and Bluetooth v4.2 BR/EDR & BLE
Flash Memory: 4 MB (Integrated SPI Flash)
SRAM: 520 KB
Antenna Type: External Antenna via U.FL Connector
Peripherals: 32 GPIOs, ADC, DAC, UART, SPI, I²C, I²S, Motor PWM, Touch Sensor
Supply Voltage: 3.0 V – 3.6 V DC
Rs 1,450.00Rs 1,650.00
Quick Info :
Compatible: ESP-01, ESP-07, ESP-12, ESP32
Interface: USB to Serial (CH340/CP2102)
Power: 3.3V regulated output
Features: Auto-reset, GPIO breakout, boot mode switches
Programming: Arduino IDE, ESP-IDF, MicroPython
Use: ESP development, testing, firmware flashing, IoT projects
Rs 1,350.00Rs 1,450.00
Quick Info :
Chip: ESP32-WROOM-32
Processor: Dual-core 240 MHz
Connectivity: WiFi + Bluetooth 4.2
GPIO: 30 pins
USB: CP2102 with Micro USB
Flash: 4 MB
Voltage: 3.3V operating, 5V input
Rs 1,350.00Rs 1,450.00
Quick Info :
Two low-power Xtensa® 32-bit LX6 microprocessors
802.11 b/g/n (802.11n up to 150Mbps) Wi-Fi protocol
BLUETOOTH® v4.2 BR/EDR and BLE
SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, and IR module interfaces
Hall sensor
2.7V to 3.6V operating voltage supply
Rs 1,280.00
Quick Info :
Wi-Fi Module : ESP-12E (ESP8266)
Clock Speed : 80MHz – 160MHz
Flash Memory : 4MB
GPIO Pins : 17 (11 Usable)
Operating Voltage : 3.3V
Rs 1,150.00Rs 1,450.00
Quick Info :
Microcontroller : ESP-8266
USB Converter : CH340G
Digital I/O : 11
Analog Inputs : 1
Rs 990.00
Quick Info :
SoC : ESP32-C3
CPU : 32-bit RISC-V Single-Core, up to 160MHz
WiFi : 802.11 b/g/n, 2.4GHz
Bluetooth : 5.0 (LE)
Flash Memory : 4MB
Board Dimensions : 22.5mm x 18mm
Rs 840.00Rs 950.00
Quick Info:
Chip : ESP8266
Flash Memory : 4MB
WiFi Standard : 802.11 b/g/n
Operating Voltage : 3.3V
Rs 510.00Rs 550.00
