-
MAX7219 8 X 8 LED Dot Matrix Module V2
Quick Info :
- Single 8×8 LED Matrix Display with 1.3″ high bright red display
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
Please note that the Jumper Cables need to be purchased separately
Rs 900.00MAX7219 8 X 8 LED Dot Matrix Module V2
Rs 900.00 -
LCD 20×4 Character Module with I2C Adapter
Quick Info :
- Interface : I2C
- I2C Address : 0x3F
- Supply voltage : 5V
- Contrast Adjust : Through Potentiometer
- Backlight : Blue
Rs 1,490.00LCD 20×4 Character Module with I2C Adapter
Rs 1,490.00 -
LCD 16X2 Keypad Shield
Quick Info :
- Operating Voltage: 5V
- 5 Push buttons.
- Left, Right, Up, Down and Select buttons
- Screen contrast adjustment
- Arduino Reset button
Rs 595.00LCD 16X2 Keypad Shield
Rs 595.00 -
USB Type B to DIP Converter Module
Quick Info :
- Connector Type: USB Type -B
- PCB Size: 20 x 20 mm
- Weight: 4g
Rs 100.00USB Type B to DIP Converter Module
Rs 100.00 -
X9C103S Digital Potentiometer Module
Quick Info :
- Simple 3 pin interface to control the resistance
- Supply voltage: 3V-5V
- Chip: X9C103S
- PCB board size: 2.7 * 1.3CM
- 10K span potentiometer.
Rs 590.00X9C103S Digital Potentiometer Module
Rs 590.00 -
PAM8403 Mini 5V Digital Amplifier Board
Quick Info :
- Maximum output power: 3W*2(5V 4Ω)
- Built with switch Potentiometer
Rs 320.00PAM8403 Mini 5V Digital Amplifier Board
Rs 320.00 -
MT8870 DTMF Voice Module
Quick Info :
- MT8870 Frequency decoder chip
- Onboard 3.5mm input interface
- 5V Input
- Designed to be compatible with standard 2.54mm sockets
Rs 490.00MT8870 DTMF Voice Module
Rs 490.00 -
UNI-T UT200B+ Digital Clamp Meter
Quick info:
- 3000-count display for precise measurements
- AC current measurement up to 600A
- AC/DC voltage measurement up to 600V
- Resistance testing up to 3MΩ range
- Capacitance measurement up to 1mF
- Auto-identify diode and continuity testing
- LIVE wire detection for enhanced safety
Rs 6,890.00Rs 7,200.00UNI-T UT200B+ Digital Clamp Meter
Rs 6,890.00Rs 7,200.00 -
TFT LCD Display Module 1.8″ SPI Interface 128×160
Quick Info :
- True TFT display with 262,144 vibrant colors
- 4-wire SPI interface – minimal pin usage
- Works with 3.3V and 5V systems
- Built-in microSD card slot for bitmap storage
- Compatible with Arduino, Raspberry Pi, ESP32
- Controllable LED backlight
- Compact 34.5×58.0mm PCB size
Rs 1,490.00 -
5V 5A SMPS Power Supply Metal Casing
Quick Info :
- Input Voltage : AC 100-240V, 50/60Hz
- Output Voltage : 5V DC
- Output Current : 5A (Max)
- Output Power : 25W
- Efficiency : ≥85%
- Ripple & Noise : ≤100mV
Rs 1,490.005V 5A SMPS Power Supply Metal Casing
Rs 1,490.00 -
DC Motor 12V RS-380
Quick Info :
- Model : RS-380
- Operating Voltage : 6V – 12V DC
- Nominal Voltage : 12V DC
- Shaft Diameter : 2.3 mm
- Shaft Length : 6.4 mm
- Motor Body Diameter : ~27.5 mm
- Motor Length : ~37.6 mm
Rs 590.00DC Motor 12V RS-380
Rs 590.00 -
TL071 Operational Amplifier
Quick Info :
- Supply Voltage : ±3V to ±18V
- Input Bias Current : 5pA
- Input Offset Voltage : 3mV
- Slew Rate : 13V/µs
- Gain Bandwidth Product : 3MHz
- Common-Mode Rejection Ratio (CMRR) : 100dB
Rs 40.00TL071 Operational Amplifier
Rs 40.00 -
TL071 Operational Amplifier
Quick Info :
- IC Type : JFET-Input Operational Amplifier
- Supply Voltage : ±3 V to ±18 V
- Input Bias Current : 20 pA (typical)
- Input Offset Voltage : 3 mV (max)
- Slew Rate : 13 V/µs
- Gain Band width Product :3 MHz
Rs 40.00TL071 Operational Amplifier
Rs 40.00 -
LED Strip White 5050
Quick Info :
- LED Type : SMD 5050
- Color : White
- Length : 5m
- Voltage : 12V
- Beam Angle : 120°
- Waterproof Rating : IP20 (Indoor)
- Installation : Self-adhesive backing or clips for mounting
Rs 285.00LED Strip White 5050
Rs 285.00 -
AKKO PVC Electrical Insulation Tape
Quick Info :
- Brand : AKKO
- Material : Polyvinyl Chloride (PVC)
- Adhesive Type : Rubber-based Pressure-Sensitive
- Thickness : 0.13mm
- Width : 18mm
- Dielectric Strength : ≥ 600V/mil
- Color Options : Black
Rs 125.00AKKO PVC Electrical Insulation Tape
Rs 125.00 -
Global PVC Electrical Insulation Tape
Quick Info :
- Material : Polyvinyl Chloride (PVC)
- Adhesive Type : Rubber-based Pressure-Sensitive
- Thickness : 0.18mm
- Width : 15mm
- Dielectric Strength : ≥ 600V/mil
- Color Options : Black
Rs 80.00 -
4 Ohms 5W Speaker 2 Inch
Quick Info :
- Speaker Type: Full-range
- Impedance: 4Ω (Ohms)
- Power Handling: 5W
- Magnet Type: Ferrite or Neodymium
- Size: 2 inches (Diameter)
- Frequency Response: 150Hz – 20kHz
Rs 350.004 Ohms 5W Speaker 2 Inch
Rs 350.00 -
Sealed Lead-Acid Rechargeable Battery 6V 4.5AH RB640CS
Quick Info :
- Voltage: 6 Volts
- Capacity: 4.5 Ampere-hours (Ah)
- Battery Type: Lead-Acid
- Dimensions: 70mm (Length) x 46mm (Width) x 106mm (Height)
- Terminal Types: B/C/E
- Design: Sealed, maintenance-free, and leak-proof
Rs 1,490.00