-
ATtiny85 Development Board
Quick Info:
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source
- Onboard 5V Regulator
- 6 I/O Pins
Rs 450.00ATtiny85 Development Board
Rs 450.00 -
TTP223 Red Capacitive Touch Sensor Module
Quick info :
- Model: TTP223.
- Dimensions: 15mm x 11mm.
- Input Voltage: 2 Volt – 5.5 Volts DC.
Rs 60.00 -
NE555 Adjustable Pulse Frequency Duty Cycle Module Square Wave Signal Generator
Quick Info :
Main chip: NE555
Input Voltage (VCC): 5V-15VDC
Input current:~100MA
Output amplitude: 4.2V V-PP to 11.4V V-PP. (Varies with VCC voltage)Rs 280.00 -
Capacitive Soil Moisture Sensor
Quick info :
- Operating voltage: 3.3V~5V
- Interface: PH2.54-3P
Rs 290.00Capacitive Soil Moisture Sensor
Rs 290.00 -
74HC4067 16-Channel Analog Multiplexer Module
Quick Info :
- 16 bi-directional channels
- Can be used as multiplexer or demultiplexer
- Channels can handle analog or digital signals
Rs 400.00 -
ESP32-C3 Supermini
Quick Info :
- 13 programmable GPIOs
- Power
– 5v
– 3.3v - Digital interfaces:
– 1 × SPI
– 1 × UART
– 1 × I2C
– 1 × I2S
– 1 x LED PWM controller - Analog interfaces:
– 2 × 12-bit SAR ADCs, up to 6 channels
Rs 950.00ESP32-C3 Supermini
Rs 950.00 -
AD828 Stereo Dynamic Microphone Preamplifier Module
Quick Info :
- Main Chip: AD828
- Working Voltage: DC 3.7-15V
Rs 800.00 -
Liquid PH Sensor Module With Electrode Probe
Quick Info :
Liquid pH Value Detection Sensor
- Heating voltage: 5±0.2V
- Working current: 5-10mA
Electrode Probe for Liquid pH Value Detection Sensor Module
- PH range: 0-14 PH
- Temperature range: 0-60℃
Rs 5,990.00Rs 7,100.00Liquid PH Sensor Module With Electrode Probe
Rs 5,990.00Rs 7,100.00 -
HLK-10M05 AC-DC 220V To 5V 2A Mini Power Supply Module
QucikInfo :
- Input voltage range: 90-240VAc
- Output current : 2A
Rs 1,950.00 -
-
Copper Board Epoxy Single Sided 1mm
Quick Info :
- Length X Width : 12cm X 8 cm
- Thickness : 1.0 mm
- Type: Copper Clad PCB Board
- Material: Epoxy Resin (FR4)
- Copper Layer: Single-Sided
- Size: A4
- Copper Thickness: ~35µm
Rs 390.00Rs 590.00Copper Board Epoxy Single Sided 1mm
Rs 390.00Rs 590.00 -
2.4 inch TFT LCD Shield 240 X 320 Touch
Quick Info :
- 240*320 pixels
- Suitable for an Uno (Atmega328P) or Mega (Atmega2560) based Arduinos (other chips are not supported)
- Dimensions: 72.5 mm x 53 mm
- Driver: ILI9320 or ILI9341 (or compatible with one of two)
Rs 2,250.002.4 inch TFT LCD Shield 240 X 320 Touch
Rs 2,250.00 -
BMP280 Barometric Pressure Sensor Module
Quick Info :
- Operating Voltage : 1.8v – 3.6v DC
- Temperature Sensor Range : -40-80°C
- Accuracy : 1.0 °C
- Resolution : 0.01°C
- Barometric Pressure Sensor Range : 30,000 – 110,000 Pa
Rs 390.00BMP280 Barometric Pressure Sensor Module
Rs 390.00 -
-
Glue gun 20W
Quick Info :
- Power : 20W
- Operating Voltage : 100-240V, 50/60Hz
- Heating Time : 3-5 minutes
- Glue Stick Diameter : 7mm-8mm
- Nozzle Type : Precision metal nozzle for controlled application
Rs 490.00Glue gun 20W
Rs 490.00 -
-
-
7X20MM Coreless Motor
Quick Info :
- Ultra-high speed: 20,000 RPM at 3.7V
- Coreless design for low noise and high efficiency
- Compact size: 7mm diameter x 20mm length
- Wide voltage range: 1V to 3.7V operation
- Low current consumption: 0.01A
- Precision 0.8mm shaft with 3.8mm length
- Ready-to-use with 5cm color-coded wire leads
Rs 490.007X20MM Coreless Motor
Rs 490.00