-
Rain Drop Sensor Module
Quick Info
- Working voltage : 5V
- Output format : Digital switching output (0 and 1), and analog voltage output AO
- Potentiometer adjust the sensitivity
- Uses a wide voltage LM393 comparator
Rs 290.00Rain Drop Sensor Module
Rs 290.00 -
ACS712 30A Current Sensor Module
Quick Info :
- The current sensor chip : ACS712
- Current measuring : up to 30A
- 5V power supply, on-board power indicator
Rs 550.00ACS712 30A Current Sensor Module
Rs 550.00 -
5V 600MA USB Output charger step up Power Module
Quick Info:
- Input voltage: 0.9V – 5V;
- Output voltage: 5V;
- Output Amps : 600mA
Rs 250.00 -
LTC817 100W DC-DC Boost Voltmeter
Quick Info :
- Input voltage range：4-35VDC
- Input current：7A
- Output voltage range：3.5-35VDC
- Output current: 6A
- Output power: 100W
Rs 1,750.00LTC817 100W DC-DC Boost Voltmeter
Rs 1,750.00 -
AC-DC 12V 1.5A SMPS Open
Quick Info :
Input Voltage : AC100 ~ 240V 50/60 HZ
Output Voltage: DC12V
Output Current: 1.5ARs 450.00AC-DC 12V 1.5A SMPS Open
Rs 450.00 -
ULN2003 Stepper Motor Driver Board Module
Quick Info :
- High Voltage Outputs: 50V
- Inputs Compatible with Popular Logic Types (5V TTL – Arduino Compatible)
- Relay Driver Applications
Rs 230.00Rs 390.00ULN2003 Stepper Motor Driver Board Module
Rs 230.00Rs 390.00 -
AT24C256 I2C interface EEPROM Memory Module
Quick Info:
- Onboard chip AT24C256 chip
- Onboard the I2C communications required pull-up resistor
- All pins are leads and marked
- PCB board Dimensions : 36.5 (mm) x12 (mm)
Rs 390.00 -
MAX7219 8 X 8 LED Dot Matrix Module
Quick Info :
- A single module can drive 8 by 8 common cathodes
- Module Operating voltage: 5V.
- Module size: 5 cm long X 3.2 cm wide X 1.5 cm high
- Module with input and output interfaces, supports multiple modules cascade
- Led colour:Red
Rs 800.00MAX7219 8 X 8 LED Dot Matrix Module
Rs 800.00 -
USB to ESP8266 WIFI Module Adapter Board
Quick Info :
Rs 460.00USB to ESP8266 WIFI Module Adapter Board
Rs 460.00 -
USB to Serial RS232 Adapter
Quick Info :
- Option 1 : DB9 Connector
- Option 2 : DB9 and DB25 Connectors
Rs 850.00 – Rs 990.00 -
ATtiny85 Development Board
Quick Info:
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source
- Onboard 5V Regulator
- 6 I/O Pins
Rs 450.00ATtiny85 Development Board
Rs 450.00 -
ESP32-WROOM-32 Module
Quick Info :
- Two low-power Xtensa® 32-bit LX6 microprocessors
- 802.11 b/g/n (802.11n up to 150Mbps) Wi-Fi protocol
- BLUETOOTH® v4.2 BR/EDR and BLE
- SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, and IR module interfaces
- Hall sensor
- 2.7V to 3.6V operating voltage supply
Rs 1,275.00ESP32-WROOM-32 Module
Rs 1,275.00 -
NE555 Adjustable Pulse Frequency Duty Cycle Module Square Wave Signal Generator
Quick Info :
Main chip: NE555
Input Voltage (VCC): 5V-15VDC
Input current:~100MA
Output amplitude: 4.2V V-PP to 11.4V V-PP. (Varies with VCC voltage)Rs 280.00 -
Capacitive Soil Moisture Sensor
Quick info :
- Operating voltage: 3.3V~5V
- Interface: PH2.54-3P
Rs 290.00Capacitive Soil Moisture Sensor
Rs 290.00 -
74HC4067 16-Channel Analog Multiplexer Module
Quick Info :
- 16 bi-directional channels
- Can be used as multiplexer or demultiplexer
- Channels can handle analog or digital signals
Rs 400.00 -
AD828 Stereo Dynamic Microphone Preamplifier Module
Quick Info :
- Main Chip: AD828
- Working Voltage: DC 3.7-15V
Rs 800.00 -
TDS and EC Meter
Quick Info :
- Conductivity : 0 – 9990 us/cm
- TDS : 0 – 5000ppm
- Temperature :
- Degrees Celsius : 0.1 – 80,
- Fahrenheit : 32.0 – 176
- Accuracy : 2%
Rs 2,590.00TDS and EC Meter
Rs 2,590.00 -
Liquid PH Sensor Module With Electrode Probe
Quick Info :
Liquid pH Value Detection Sensor
- Heating voltage: 5±0.2V
- Working current: 5-10mA
Electrode Probe for Liquid pH Value Detection Sensor Module
- PH range: 0-14 PH
- Temperature range: 0-60℃
Rs 5,990.00Rs 7,100.00Liquid PH Sensor Module With Electrode Probe
Rs 5,990.00Rs 7,100.00