Best Seller Items
-
-
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00 -
LED 5mm Bulb Common Anode
Specification:
- 5mm Round Standard Directivity
- Color : Red, Blue, Green, White, Yellow
- UV Resistant : Eproxy
- Forward Current (IF): 30mA
- Forward Voltage (VF): 1.8V to 2.4V
Rs 4.00LED 5mm Bulb Common Anode
Rs 4.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 20.00 – Rs 110.00
-
-
Nema17 4234 Stepper Motor
Quick Info :
- Size: Nema17 (42 mm × 42 mm × 34 mm)
- Step Angle: 1.8° (200 steps/rev)
- Voltage: 12 V DC
- Current: 1.5 A per phase
- Torque: 0.4 Nm (40 N.cm)
Rs 2,200.00Rs 2,500.00Nema17 4234 Stepper Motor
Rs 2,200.00Rs 2,500.00 -
Nema17 Stepper Motor Bracket
Quick Info :
- Compatible Motor : NEMA17
- Material : Steel
- Finish : Black coated
- Thickness : 3 mm
Rs 280.00Rs 350.00Nema17 Stepper Motor Bracket
Rs 280.00Rs 350.00 -
NEO M8N GPS GLONASS Receiver Module
Quick Info :
- Type: GPS/GNSS Receiver Module
- Supported Systems: GPS, GLONASS, Galileo, BeiDou
- Accuracy: 2.5m horizontal
- Update Rate: Up to 18Hz
- Voltage: 3.3-5V
Rs 2,850.00Rs 2,950.00NEO M8N GPS GLONASS Receiver Module
Rs 2,850.00Rs 2,950.00 -
NEO-6M GPS Module with Active Antenna
Quick Info :
- Operating temperature range: -40 TO 85°CUART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
- Supply voltage: 3.3 V
Rs 1,290.00Rs 1,800.00NEO-6M GPS Module with Active Antenna
Rs 1,290.00Rs 1,800.00 -
NodeMCU Wi-Fi Development Board
Quick Info :
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
Rs 1,150.00Rs 1,450.00NodeMCU Wi-Fi Development Board
Rs 1,150.00Rs 1,450.00 -
NRF24L01 2.4GHz Transceiver
QUICK OVERVIEW
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Built-in voltage regulator
Rs 490.00NRF24L01 2.4GHz Transceiver
Rs 490.00 -
NRF24L01 2.4GHz Transceiver Adapter Base
Quick Info :
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
Rs 250.00NRF24L01 2.4GHz Transceiver Adapter Base
Rs 250.00 -
NRF24L01 2.4GHz Transceiver With Antenna
Quick Info :
- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
Rs 950.00NRF24L01 2.4GHz Transceiver With Antenna
Rs 950.00 -
Nylon Cable Tie Black
Quick Info :
- Material: Nylon 66
- Dimensions: 3.6x150mm, 3.6x300mm, 4.8x450mm
- Feature: Self-Locking, Single-Piece Construction
- Resistance: Excellent resistance to bases, oils, and greases
- Color: Black
Rs 5.00 – Rs 15.00Nylon Cable Tie Black
Rs 5.00 – Rs 15.00 -
OLED 128X64 0.96 inch Display Module
Quick Info :
- OLED Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
Rs 750.00Rs 990.00OLED 128X64 0.96 inch Display Module
Rs 750.00Rs 990.00 -
OMRON G2R-2 24VDC 5A PCB Power Relay
Quick Info :
- Model: G2R-2
- Coil Voltage: 24VDC
- Contact Form: DPDT (2c)
- Switching Current: 5A
- Mounting: PCB Terminals
Rs 650.00Rs 750.00OMRON G2R-2 24VDC 5A PCB Power Relay
Rs 650.00Rs 750.00 -
PAM8403 3W Audio Amplifier
Quick Info:
- Supply Voltage: 5VDC
- 3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 130.00PAM8403 3W Audio Amplifier
Rs 130.00 -
PAM8403 Mini 5V Digital Amplifier Board
Quick Info :
- Maximum output power: 3W*2(5V 4Ω)
- Built with switch Potentiometer
Rs 320.00PAM8403 Mini 5V Digital Amplifier Board
Rs 320.00 -
PAM8610 15Wx2 Stereo Audio Amplifier Board
Quick Info :
- Main Chip: PAM8610
- Power Range: DC 6V-15V (self-protection)
- Recommended Voltage: DC 12V(2A)
- Output Power: 10Wx2(8Ω) 15Wx2(4Ω)
Rs 450.00 -
Panel Indicator LED 12V Red Flat Head 6mm
Quick Info :
- Voltage: 12V DC
- Color: Red
- Mounting: 6mm diameter
- Style: Flat head
- Wire Length: 15cm pre-wired
- Use: Panel indicators, status lights, automotive
Rs 190.00Rs 200.00Panel Indicator LED 12V Red Flat Head 6mm
Rs 190.00Rs 200.00 -
Panel Mount Toggle Push Button Switch PBS-11A
Quick Info :
- Model : PBS-11A
- Mounting Hole Diameter : 12 mm
- Type : Toggle Latch style push button
- Colours : Red / Green / Yellow / Blue
Rs 40.00Rs 60.00 -
Panel Mount Voltmeter DC5-120V
Quick Info :
- Voltage Range: DC 5 V – 120 V
- Display: 3-digit LED
- Accuracy: ±1%
- Connection: 2-wire
- Cutout Size: 45 mm x 26 mm
Rs 550.00Rs 700.00Panel Mount Voltmeter DC5-120V
Rs 550.00Rs 700.00 -
Passive Buzzer 5V
Quick Info :
- Operating Voltage : 3V – 5V (typical 5V)
- Current Consumption : ≤30mA
- Rated Frequency : 1kHz – 3kHz (typically 2kHz)
- Sound Output : 85dB @ 10cm (varies by model)
- Drive Method : Requires external PWM signal
Rs 55.00Passive Buzzer 5V
Rs 55.00 -
Passive Heat Sink Small – Aluminum & Copper (Raspberry Pi Compatible)
Quick Info :
- Type: Passive Extruded Aluminum Heatsinks & Copper/Brass Heat Spreaders
- Material: Aluminum (Alloy) and Copper/Brass
- Variable Sizes (Aluminum): 14x14x7mm, 14x14x5mm, 14x9x5mm, 9x9x5mm
- Variable Sizes (Metal Spreaders): 14x14x1mm, 12x12x1mm (Brass/Gold Finish)
- Application Use: Cooling small ICs, MOSFETs, Voltage Regulators, and Raspberry Pi components
Rs 40.00 – Rs 100.00Passive Heat Sink Small – Aluminum & Copper (Raspberry Pi Compatible)
Rs 40.00 – Rs 100.00 -
PC817 Optocoupler IC
Quick Info :
- Optocoupler Type : Phototransistor Output
- Package : 4-Pin DIP / SMD
- Input Type : Infrared LED
- Output Type : NPN Phototransistor
- Isolation Voltage : 5000V RMS
- Forward Voltage : 1.2V
Rs 20.00PC817 Optocoupler IC
Rs 20.00 -
PCB Stand Screw M3 Male Female
Quick Info :
- 10x PCB Stand Screw M3
- 10x M3 Screw Nut and Washer
Rs 25.00PCB Stand Screw M3 Male Female
Rs 25.00 -
PCM5102 DAC I2S Interface Decoder
Quick Info :
- Chip: PCM5102
- Resolution: Up to 32-bit/384kHz
- Interface: I2S
- Power: 3.3 V – 5 V DC
Rs 850.00Rs 1,050.00PCM5102 DAC I2S Interface Decoder
Rs 850.00Rs 1,050.00 -
PH Sensor Test Pen
Quick Info :
- Measure range : 0.00-14.00 pH
- Resolution : 0.01 pH
- Accuracy : +/- 0.01 pH
Rs 2,790.00PH Sensor Test Pen
Rs 2,790.00 -
Photo Control Switch AS-10-220
Quick Info :
- Voltage: 220V AC
- Max Current: 10A
- Function: Auto Dusk-to-Dawn
- Feature: Weatherproof Design
- Use: Street/Garden Light Automation
Rs 650.00Rs 750.00Photo Control Switch AS-10-220
Rs 650.00Rs 750.00 -
PIC16F877A Microcontroller
Quick info :
- Enhanced 8-bit RISC CPU
- 256 bytes of EEPROM data memory
- 33 I/O pins for versatile connectivity
- Integrated ADC module for analog sensing
- Flexible USART, SPI, and I2C communication interfaces
Rs 1,590.00PIC16F877A Microcontroller
Rs 1,590.00 -
Piezo Plate 27mm / 35 mm
Quick Info :
- Available sizes : 27MM & 35MM
Rs 45.00 – Rs 95.00 -
Pillow Block Bearing 8mm, 10mm, 12mm
Quick Info :
- Size Options : 8mm / 10mm / 12mm
- Material : Zinc Alloy + Steel
- Mount Type : Two-hole Pillow Block
- Feature : Self-aligning, smooth rotation
Rs 400.00 – Rs 500.00Pillow Block Bearing 8mm, 10mm, 12mm
Rs 400.00 – Rs 500.00 -
PJ-324M Stereo Female Jack Base PCB 3.5mm
Quick Info :
- 3.5mm Stereo Socket
- PJ-324M
- PCB or Panel Mount : 5 Pin
Rs 50.00 -
-
Plastic Wheel + Gear Motor
Quick Info :
- Name: TT motor
- Type: 1:48
- Speed: 45±10%r/min 90±10%r/min
- Rated voltage: 3V/6V
Rs 350.00Plastic Wheel + Gear Motor
Rs 350.00 -
Plastic Wheel for TT Gear Motor
Quick Info :
- Wheel diameter: 65mm
- Wheel thickness: 28mm
- Weight : 40g
Rs 100.00Rs 140.00Plastic Wheel for TT Gear Motor
Rs 100.00Rs 140.00 -
Power Line Communication Module KQ330
Quick Info :
- Type: Power Line Communication Module
- Data Rate: ~10kbps
- Carrier Frequency: 120 kHz
- Operating Voltage: 230V AC
Rs 3,500.00Rs 3,900.00Power Line Communication Module KQ330
Rs 3,500.00Rs 3,900.00 -
Precision Screw Driver Set 7 Pcs SW-993
Quick info :
Bit pattern:
“+” (Phillips) – 1.5 mm: This represents a Phillips head screwdriver bit, typically used for cross-head screws.
“-” (Flathead) – 2.5 mm: This indicates a flathead (slotted) screwdriver bit, used for straight slotted screws.
“★” (Torx) – 0.8 mm: This represents a Torx screwdriver bit, used for star-shaped screw heads, commonly found in electronics.
“Y” (Tri-Wing) – 0.6 mm: This denotes a Tri-Wing screwdriver bit, often used for specialized screws in electronic devices like gaming consoles.Rs 690.00Precision Screw Driver Set 7 Pcs SW-993
Rs 690.00 -
Pressure Transducer Sensor 0-0.5Mpa G1/4 5VDC
Quick Info :
- Pressure Range: 0 – 0.5 MPa (0 – 72.5 PSI)
- Power Supply: 5 V DC
- Output: 0.5 V – 4.5 V analog
- Thread: G1/4 male
Rs 4,950.00Rs 5,550.00Pressure Transducer Sensor 0-0.5Mpa G1/4 5VDC
Rs 4,950.00Rs 5,550.00
